Products

Electrical Energy- Saver for Illumination (15kVA to 5000 kVA)

China Electrical Energy-Saver for Illumination (15kVA to 5000 kVA), Find details about China Illumination Energy-Saver, Electrical Energy Saver from Electrical Energy-Saver for Illumination (15kVA to 5000 kVA)

Model NO.
SJD
Origin
China
Model NO.
SJD
Origin
China
Overview:
Electrical equipment is designed to accept a wide range of input voltages about its nominal design centre. However, if the actual supply is higher than necessary the equipment will consume more power than needed and in many cases, equipment life is reduced, effectively in creasing the cost of ownership. 
A 230V linear appliance operated at 240V will consume approximately 9% more energy than necessary. A voltage reduction within statutory limits can produce up to 25%(subject to load) reduction in energy consumption and in addition will extend the life of many types of electrical equipments. 
By reducing supply voltages to a controlled, site adjustable level, our Voltage Optimization Unit(VOU) allows equipment to operate at optimum efficiency. The result is lower overall running and ownership costs and reduced carbon footprint each kWh of electrical energy saved is equivalent to 0.537kg of CO2.
 
Electrical Energy-Saver for Illumination (15kVA to 5000 kVA)
Features:
During the working period of electric illumination equipments or appliances, the energy-wasting factors like unbalance load, harmonics, and reactive power could lead to great electricity losses and unnecessary rise in power consumption, low efficiency, and higher maintenance costs. Also, the lifespan of these equipments will be shortened because of those factors.

As a power solution provider, we have taken our own responsility to research and developed a special kind of intelligent power conditioner for illumination system, such as for gas discharge lamps.
 
Benefits:
-  Energy saving of up to 25%
-  Fast return of investment(ROI) time
-  Prolonged equipment life span
-  High operational efficiency
-  Adjustable configurations based on site requirements
-  GPRS and Wireless Energy Monitors for real-time energy monitoring
-  Protects equipment against failures due to over or under voltage
-  Internal no-break bypass allowing no power interruption during maintenance
-  Single and three phase up to 5000KVA 
Input Voltage Phase to neutral: 230V±15% (195V~265V) adjustable
Output Voltage Phase to neutral: 220V adjustable
Output Accuracy ±1.5%
Supply Frequency 50/60Hz
Voltage Regulation Mode Independent phase regulation
Insulation Class H class
Duty Type Continuous 
Cooling Type Natural Air(AN)/Forced Air(AF)
Efficiency >98% at full load
Protection Class IP20(indoor), outdoor on request
Electrical Safety CE equivalent
Operational Temperature  -20 °C to +45 °C 
Relative Humidity <90%
GPRS Remote control and monitoring the VO unit parameters
Master Controller Set output voltages 225V, 220V and 215V by manual
 
Model Dimension(W×D×H)mm
SJD-15KVA 300×720×1270
SJD-20KVA 300×720×1270
SJD-30KVA 300×720×1270
SJD-50KVA 300×800×1370
SJD-80KVA 300×800×1370
SJD-100KVA 300×800×1370
SJD-120KVA 300×800×1370
SJD-150KVA 400×900×1600
SJD-180KVA 400×900×1600
SJD-200KVA 400×900×1600
SJD-250KVA 500×1050×1800
SJD-300KVA 500×1050×1800
SJD-350KVA 500×1050×1800
SJD-400KVA 500×1050×1800
SJD-500KVA 600×1250×2000
SJD-600KVA 600×1250×2000
SJD-800KVA 600×1250×2000
SJD-1000KVA 800×1800×1900
SJD-1200KVA 1000×1800×1900
SJD-1500KVA 1000×1800×1900
SJD-2000KVA 1000×1800×1900  two cabinets
SJD-3000KVA 1000×1800×1900  two cabinets
SJD-4000KVA 1000×1800×1900  three cabinets
SJD-5000KVA 1000×1800×1900  four cabinets

You Might Also Like