pin keyboard passive short distance rfid reader

What is the Specifications of our Keypad Card Reader?

• Less than 0.2 second Response Speed
• Less than 0.5 seconds Proximity Time Distance
• 2-15cm Proximity Range
• Support EM-ID 125Khz card or keyfob
• Built-in Antenna
• Built-in LED (Double Color LED)
• Built-in Loud Speaker (Buzzer)
• DC 12V Working Voltage,70mA Working Current
• 100 Meters Communication Distance
• Real Time Data Transfer
• Dark Grey  Color
• PVC Case Material 
• 108mm*88mm*32m

 Using + type screw driver to loosen the screw between the panel and motherboard. And then embed the motherboard to the side wall with the plastic plug and screws.

Wire Connection

Red        DC 12V

Black       GND

Green       D0

White        D1

Blue          LED

Yellow      Beeper

Notice

1. Confirm the electric voltage (DC12V) and differentiate positive anode and cathode of power supply

2. When external Power is used, make sure sharing the power with Controller Box or using the same GND

3. When the distance between card reader and controller is more than 50m, please use Power Line with at least 1.5 square cm Dia, or using several parallel Network wires

Application 

Contact us 

Reader Photo 

Wire connection