KINKAI Mushroom Dryer Machine Introduction:
KINKAI Heat pump mushroom dryer machine takes advantage of the reversed Carnot principle, absorbing the heat from around and sending the heat to the materials which will be dried.
This kind of dryer is mainly composed of heat pump dryer and drying chamber.
This dryer will be controlled by touch screen controller, and the temperature can be adjusted. It has low electric consumption.

1, Energy saving and environment  protection
Adopt close dehumidify + circulating drying type, saving operating cost;
Without waste gas and waste heat pollution, low noise

2, Stable property and operating easily
Touch screen full automatic control
Different materials with different drying type, adopt PLC control, can setting different drying curve, suitable for drying different materials.

3, Second waste heat recovery technology(patent)
    Adopt air to air heat exchanger dehumidify and recovery waste heat at the same time, saving energy more than 40%.

4, Accurate control temperature and humidity
    According to different material setting different drying curve, the heat pump dryer can control the drying chamber temperature between 10~75C.

5, Horizontal Blowing 360ºC
    By using the forced ventilation function, there are partition sheet and fan motors inside the drying chamber to make sure hot air cycle, so ensure a high drying efficiency and save energy, lead to a uniform drying.

6, It's batch operation, so can adjust process condition anytime. Thus can change product from time to time

7, Dry material in tray, easy for load and unload, not easy cause any damage for the raw material, clean conveniently.   

B. After-sales service
1, Technical support for your installation, operation and maintenance. 
2, One year's warranty, and you can pay for extended warranty.
3, Spare parts and technical support at most economic prices after the warranty.