Stainless steel /Red copper 5BBL 10BBL 15BBL  20BBL 30BBL 50BBL  Conical Unitank Fermenter for Beer Brewery Fermentation with Glycol colling  Jacket 
Jinan tonsen equipment co., ltd. is an international comprehensive enterprise ,which is specializing in r&d,production,technical support and services for beer equipment and wine equipment .we provide complete beer brewing solutions that include: malt handling system, brew house system, beer fermenting/storage system,cooling system, cleaning system, control system, package line.
Industrial fermentation tank
Industrial fermentation tank are also called CCT's (Cylindrical Conical Tanks), fermenters, FV's (Fermentation Vessel), primary fermentor or unitanks as they are used both for fermenting and lagering.Fermenting is the process during which the yeast transforms the wort into beer. Lagerings takes place after fermenting and is the time given to the beer to stabilize and age after fermenting. 

 

Industrial fermentation tank main details

• Material: 304 stainless steel
• Interior and exterior finish polished to a sanitary finish
• Interior finish pickled and passivated
• Exterior brushed, Fully welded exterior shell
• 60-72 degree cone bottom, with an average of 25% head space
• Rotating racking port
• Top manhole or side manhole
• Dual zone dimple cooling jackets
• Polyurethane insulation 80mm
• CO2 blow off arm
• CIP arm and spray ball
• Sanitary tri-clamp connection
• Dry hop port
• Stainless steel handle butterfly valve,sample vale
• Safety valve(Breathing valve),Water seal co2 exhaust valvee
• Clamps and gaskets, pressure gauge
• Stainless steel legs with stainless leveling footpads

Beer Brewing Equipment
Our product includes a variety of large, medium and small brewery equipment, hotel, bar home-brewed beer equipment, teaching experiment etc. And could be used to brew various types of wine, beer, barley-bree (whisky) brandy. We supply brewing of main and auxiliary raw material, technical training, secondary equipment and control equipment, of course, can customize according to customer required special specifications design, production, installation of equipment and other products.

Fermentation systems
Fermentation systems consists of Fermentation Tank and Bright Beer Tank.Fermentation Tank structure and design differs depending on fermentation process.the normal Fermentation Tank structure is dish head up and cone down,the tank is equipped with cooling installation,there is a cooling jacket on tank cone section,columnar part has two or three cooling jackets.This not only can meet the relevant requirements of cooling, guarantee cooling rate of fermentation tank, also help to precipitation and storage the yeast.



2. Fermenting system
1)Available from 100L to 20000L (1 gallon to 20 gallon) and average 25% Head Space.
2) All tanks have a Dish top,
3)Cylinder body & 60/70° Cone Bottom.
4)Certified stainless steel(304,316) material for all tanks, with 100% TIG welded joints and seams with sanitary interior polish.
5) Dimple Plate jacket for Glycol cooling & high efficient Polyurethane foam insulated.
6)All tanks use Tri-clamp connections, are designed for up to 14.7 PSI and tested at 30 PSI.
7) We can customize fabricate any tank to meet your brewery's space and height restrictions. 



Tonsen brewing equipment has been exported to more than 70 countries, which include usa, canada, australia, japan, uk, france germany,denmark,norway, agentina,russia etc.Please check our Tonsen Brewery Case 



Tonsen Beer equipment Customer good feedback

Manufacturing of the industrial fermentation tank

1. Welding: We abandoned the argon gas cylinder but adopt The Central System of Argon to make sure the

TIG welding with pure argon gas shield. We also increase the using amount of gas when welding,

so the quality of the welding line is more higher.

2.Dimpling: We adopt dimple plate rather than belt for glycol jacket, since it can increase the cooling area and

improve the speed of cooling. The most important thing in brewing process is to avoid contaminating,

that is to say the most important thing in producing beer equipment is to polish the inside tanks to 0.4~0.6 μm

Without dead corner.

 3.Polishing: We use large-scale polishing equipment to polish the inside of the tanks - all over the wall to

make sure there is no dead corner. And we adopted passivation and acid pickling which will make our tanks with higher accuracy. You need not worry about there will be some bacterias remained after cleaning.

Tonsen Beer equipment Package&shipment 




Here are our advantages:
1.We are one of the biggest pharmaceutical, beverage and brewery equipment manufacturers in China with more than 10 years experience.
2.Strong productivity of kinds vessels, we can produce satisfied product according your design.
3.Advanced technology assures strong welds and smooth seams.
4.Attention to detail at every step.
5.OEM / ODM services ,we provide one-stop services from one concept to a real product , and we can offer you very competitive prices

Features & Advantages:

1. Mashing tun / Boiling tun: Use steam heat method, with designed jacket and agitation device to ensure the heating rate while avoiding coking, saving steam. 
2. Lauter tun / Whirlpool tun: Easy assembly, with detachable combination of arable knife and sieve plate to achieve better stirring effect. Increase the diameter of the central cylinder to improve the effect of stirring and drain rate. The wort outlet is designed according to dynamic study which enables the collection of wort to be faster and more homogeneous. The design on the bottom of whirlpool tun is in line with the characteristic of the sink trub, which separate the clear wort and turb well. 
3. We can provide customization according to different design: mash tun with lauter tun, boiling tun with whirlpool tun, or separate 4 vessels combination. 
4. All tanks are manufactured by SUS304/316, with an inner polish of less than 0.4µm and outer polish of less than 0.8µm. 

Guarantees:
All the materials touching with beer directly are all top quality food grade stainless steel
We use the first class valves and manhole for our equipments
All the materials I use is nonmagnetic.
The thickness of the material exact fit in with what shown in our quotation sheet
Our staff is always available for your needs and questions.

In Tonsen, Quality is our culture!

We'd like to share more information with you about us, about our factory, our products, our rawmaterial, manuracutring progress etc. The quality is not only shows by the tank appearance.
Generally there are four main elements may have influence for the equipment quality: The raw material, the drawing of the quipments, the welding and polishing and the testing.

(1) About the raw material:
About the sanitary stainless steel 304 , we use 3mm interior shell and 2mm exterior shell.And we usually take the samples to test it from the government. We ensure its quality!
 
(2) About the drawing:
Generally our technician will design the suitable layout accordingly before production once our customers confirmed their orders.
Then our workshop will do the manufacturing strictly according to the detailed drawing. It is normative for every order.

(3) About the welding and polishing:
We make sure the 100% TIG welding with pure argon gas shield. We use the central system of argon, instead of ordinary gas cylinder.
The argon will help to reduce the oxygenation. After welding, they will be polished to arrive to 0.2~0.4 μm without dead corner firstly, then do acid pickling and passivation.
Which will help to remove the oxygenation on welding line; and form protection film on the steel to avoid rust. It will help you to extend the tanks life time.

Services:
  

Our Service:
1.Our market team can serve you in 24 hours, so please feel free to contact at your convinent.
2.Our dedicated engineers can supply 2D,3D drawing for you

We can customize the equipment according to your request!!!Welcome to contact us for more details!Leave message to gain updated price and configuration.
JINAN TONSEN EQUIPMENT CO.,LTD.
tonsenbrew.en.made-in-china.com
I will reply to your in 24 hours!!!