Products

Zw20 Iron Shell and Stainless Shell High Voltage Recloser

China Zw20 Iron Shell and Stainless Shell High Voltage Recloser, Find details about China Automatic Circuit Recloser, High Voltage Recloser from Zw20 Iron Shell and Stainless Shell High Voltage Recloser

Model NO.
ZW20
Poles Number
3
Type
Circuit Breaker
Function
Conventional Circuit Breaker, Circuit-Breaker Failure Protection, Overcurrent Protection, OVP(Overvoltage Protection)
Certification
VDE, ISO9001-2000, Tape Tested
Trademark
Farady
Transport Package
Wooden Case
Origin
Zhejiang, China
HS Code
8536200000
Model NO.
ZW20
Poles Number
3
Type
Circuit Breaker
Function
Conventional Circuit Breaker, Circuit-Breaker Failure Protection, Overcurrent Protection, OVP(Overvoltage Protection)
Certification
VDE, ISO9001-2000, Tape Tested
Trademark
Farady
Transport Package
Wooden Case
Origin
Zhejiang, China
HS Code
8536200000

Overview


ZW20 series circuit breaker is the intelligent power distribution equipment which to solve the problems listed below:
1.Failures in T branch of overhead line cause the whole distribution off
2.Short circuits in the user end cause the whole distribution line off
 
Working with our CMS-4000 distribution automation system to switch off the short circuit failures and earthing failures automatically. They can monitor the line status, realize remote control, telemeter,  remote signal and remote regulating, and are the ideal intelligent distribution automation circuit breaker.
 

Service Condition

1.Altitude:   ≤3000 Meters
2.Enviroment temperature: outdoor -40ºC ~ +40ºC the daily temperature difference is 25ºC
3.Wind speed: ≤35m/s
4. Location is without inflammable substances, explusives, rustry chemicals and strenuous vibaration
Zw20 Iron Shell and Stainless Shell High Voltage Recloser

Technical Parameters

NO.ItemUnit Numeric
1Nominal  VoltageKV12
2Rated  FrequencyHZ50
3Rated  CurrentA630
4Rated Short-circuit Breaking CurrentKA20
5Dynamic Stability rated currentKA50
6RMS/Rated the rmal stabilizationKA/S20/4
7Mechanism lifeTimes10000
8Rated short-circuit closing breaking NumberTimes30
9Rated operating sequence O-0.3s-CO-180s-CO
10Rated breaking current numberTmes10000
11Rated short-circuit close-open currentKA50
12Rated insulation levelKV Short Power-frequency withstandThunder
shocking
PE42/3475
PP42/3475
Fracture48/3485
Assist2 
13SF6 rated pressure (20 spend pressure)MPa0.01
14Rated short-circuit closing breaking NumberT30
15Rated short-circuit cut-off current's DC component%dc51.3



Packaging & Shipping

Zw20 Iron Shell and Stainless Shell High Voltage Recloser
 

About Us

Founded in 1996, with a registered capital of 10 million USD, Zhejiang Farady Electric enjoys about 20 years' experience in MV transmission and distribution electrical equipment manufacture.
We are National Hi-tech enterprise, National Spark plan Program,State Hi-tech enterprise, State Innovation R&D center, Patent demonstrate company.
Farady is located in Liushi of Yueqing, Zhejiang,China,main products include: Transformer/RMU/switchgear/AVR/ACR and MV indoor and outdoor switch. All the products of ours have passed the national and international laboratory type test, Farady Electric was qualified supplier of China State Grid and China southern Grid.
With ISO9001/14001/18001, we are strike for create value for our partner and customer.
There is more than 20 distributors and agents worldwide already trust us and distribute Farady product there, we are not only export product, but also provide whole technology solution to help partner to establish local factory in our business line.
Today, boasting the value of products specialization, brand management, and business globalization, with the sprits of pragmatism, innovation, efficiency, and responsibility, Farady Company is dedicated to become the top name in the international business from china, and contributes its share to the transformation from the Made in China into the Invented in China.
WE COMMITTED TO PROVIDE A BETTER POWER.
Zw20 Iron Shell and Stainless Shell High Voltage Recloser

 

Our Advantages

  
1. The conventional reactive power compensation method has a large compensation capacity and the adjustment is not flexible, it will lead to the compensation is not suitable , often appear over and not enough.
2. The capacitor switching can cause over-voltage and inrush current, and it will seriously affect and reduce the service life of the switch. 
3. When the capacitor is switched on, as the capacitor will charged and discharged, when it need to switch on again, which affects the speed of the switching..
       According to the above problems, our company developed the FLYK type reactive power compensation device, has the following advantages:
(1). Energy conservation: Farady voltage regulating type capacitors will change the output reactive power by regulating voltage on capacitors, so that the reactive power can be adjusted smoothly. Comparing with other method, it can ensure the capacitors in best condition, the energy saving effect is much better 
(2). Low cost:If the old power transformer substation need to reform, only need to add a voltage regulator between the circuit breaker and capacitors, the original circuit breakers, reactors, capacitors can be reuse, greatly reduce the cost of transformation
(3). Maintance Free:When traditional circuit breaker and contactor switching, switching devices and capacitors often damaged because of the above problems, result in high maintenance costs, using Farady devices, automatic control reactive power output, there is no potential risks of other equipments, greatly reducing maintenance and staff costs in power transformer substation 
(4) Quality Assurances
We have a strictly quality control process from the raw material to finished products. Advanced testing lab to make sure products quality and improve our creative ability. Quality and Safety is the soul of our products.
(5) Excellent Services  
Many years of manufacturing experience and rich export business help us to establish a well-trained sales service team for all customers.
(6) Fast Deliveries
Strong manufacture capacity to satisfy urgent leading time. It is around 15-25 working days after we receive the payment. It varies according to the different products and quantity.
(7) OEM ODM and MOQ
Strong R&D team for quick new products' development, we welcome OEM, ODM and customize request order. Whether selecting a current product from our catalog or seeking engineering assistance for your application. You can tell us about your sourcing requirements 
Normally our MOQ is 100pcs per models. We also produce OEM and ODM as you requirement. We are developing worldwide agent.

FAQ

1.Why choice us Farady?
After compare quality,delivery and price you will find out answer
2. Is that possible to be one of distributor of Farady in my country?
Yes,once you action is fast enough 
3,More question......
Feel free to contact you,you will get immediately reply
 

Contact Us


 

You Might Also Like