Products

Pgs-20kv/600A Outdoor Pole Mounted Sf6 Gas Insulated Load Break Switch (LBS)

China Pgs-20kv/600A Outdoor Pole Mounted Sf6 Gas Insulated Load Break Switch (LBS), Find details about China Load Break Switch, Gas Insulation Load Break Switch from Pgs-20kv/600A Outdoor Pole Mounted Sf6 Gas Insulated Load Break Switch (LBS)

Model NO.
PGS
Poles Number
3
Type
Circuit Breaker
Function
Conventional Circuit Breaker, Circuit-Breaker Failure Protection, Overcurrent Protection, OVP(Overvoltage Protection)
Certification
VDE, ISO9001-2000, Tape Tested
Trademark
FARADY
Transport Package
Wooden Case
Origin
Zhejiang, China
HS Code
8535210000
Model NO.
PGS
Poles Number
3
Type
Circuit Breaker
Function
Conventional Circuit Breaker, Circuit-Breaker Failure Protection, Overcurrent Protection, OVP(Overvoltage Protection)
Certification
VDE, ISO9001-2000, Tape Tested
Trademark
FARADY
Transport Package
Wooden Case
Origin
Zhejiang, China
HS Code
8535210000

++++General
PGS type pole-install load switch was used in 12kV,24kV,33kV rated voltage, rated current 400/630A; 50/60HZ with the load current; over load current of power line open circuit and opening and closing electric systems.
The switch can equiped with a conttoller with most advanced technical parameter.
PGS-A type PGS is manaully LBS for choice.
PGS-M type PGS is a intelligent type LBS for choice. It can automatically disconnect when the distribution line was break down. It could operated by handle; Implementt electro motion and distant. The electric controller was installed in stainless steel cabinet. So it could use in any conditions.
Pgs-20kv/600A Outdoor Pole Mounted Sf6 Gas Insulated Load Break Switch (LBS)

++++Service environment

  1. Air temperature:
Maximum temperature: +40ºC; Minimum temperature:-20ºC
  1. Humidity:
Monthly average humidity 95%; Daily average humidity 90% .
  1. Altitude above sea level:
Maximum installation altitude: 2500m
  1. Ambient air not apparently polluted by corrosive and flammable gas, vapor etc.
  2. No frequent violent shake
++++Feature
  1. SF6 gas insulated : SF6 is a electric insulating gas of non-poison and nonflammable, and have a good arc suppression feature.
  2. Bushing diversity: Except for standard porcelain bushing, there are also provide various rubber bushing.
  3. Visible open circuit and opening and closing situation: It is easy to see the color sign of the main contact place indicator ( green open circuit; red closing). The indicator and main conductor always keep on direct connecting, make sure show the conductor state.
  4. Fast operation: Used by spring stored energy operation system., make sure fast switch on and switch off operate ( no more than 1 second)
  5. Could  provide  controller:  Stocked by  electric controller,  could  operated  in  ground  or operate by the main controller through RTU screen
  6. Solidity switch: Switch was made by solidity and anticorrosion material, make sure have a long useful life (30 years) have the pole equipment feature.
  7. Standard: it will filled full SF6 before delivery, and deal with seal. Test by IEC60265; GB3804.

++++ Main technical specifications

No
Item
Unit
Data

1
Rated voltage
kV
12/20/33

2
Rated current
Hz
50/60


3
Rated insulation level

(with SF6 gas 0.07Mpa)
lightning impulse voltage
kV
75/125/170

Power frequency impulse voltage
kV
42/50/70

5
Rated current
A
630

6		Rated open circuit load current(0.07Mpa//20ºC/h)
A
630

7
Open circuit current under 0 pressure
A
630

8
Rate peak value withstand current
kA
50

9
Rated short-time closing current
kA
50

10
Rated short-time withstand current
kA/s
20/1

11
Rated electric cable charge open circuit current
A
25

12
Rated wire charge open circuit current
A
16

13
Rated closed loop open circuit current
A
630

14
Excitation current
A
21

15
Rated current open circuit times
≥400 times

16
Rated working pressure
MPa
0.07

17
Each operating voltage and resistance
μΩ
≤150

18
Gas relative leakage rate
year
≤1%


19
SF6 gas moisture content
Leave factory relative figure
ppm
≤150

Switch working figure
ppm
≤300

20
Machine stable operation
times
6000


21

Rated operating voltage and assistant loop rated voltage
V
DC220;110

AC 220;110


22
Weight
M type
kg
115

A type
135

Pgs-20kv/600A Outdoor Pole Mounted Sf6 Gas Insulated Load Break Switch (LBS)
+++Packaging & Shipping +
Pgs-20kv/600A Outdoor Pole Mounted Sf6 Gas Insulated Load Break Switch (LBS)

++++About Us
Founded in 1996, with a registered capital of 10 million USD, Zhejiang Farady Electric enjoys about 20 years' experience in MV transmission and distribution electrical equipment manufacture.
We are National Hi-tech enterprise, National Spark plan Program, State Hi-tech enterprise, State Innovation R&D center, Patent demonstrate company.
Farady is located in Liushi of Yueqing, Zhejiang, China, main products include: Transformer/RMU/switchgear/AVR/ACR and MV indoor and outdoor switch. All the products of ours have passed the national and international laboratory type test, Farady Electric was qualified supplier of China State Grid and China southern Grid.
With ISO9001/14001/18001, we are strike for create value for our partner and customer.
There is more than 20 distributors and agents worldwide already trust us and distribute Farady product there, we are not only export product, but also provide whole technology solution to help partner to establish local factory in our business line.
Today, boasting the value of products specialization, brand management, and business globalization, with the sprits of pragmatism, innovation, efficiency, and responsibility, Farady Company is dedicated to become the top name in the international business from china, and contributes its share to the transformation from the Made in China into the Invented in China.





Copyright 2014 Farady Electric 
Zhejiang Farady Powertech Co.,Ltd
TEL:0086-0577-61512688
Fax:0086-0577-61510628
Http:// faradypowertech.en.made-in-china.com
 
Add: N.O.278,Wei 7 Rd,Yueqing Economic development Zone,Liushi,Yueqing,Zhejiang,P.R.China, 325600

You Might Also Like