Products

Welding Flux Sj101 for Spiral Steel Pipe, Structural Steel Fabrication

China Welding Flux Sj101 for Spiral Steel Pipe, Structural Steel Fabrication, Find details about China Welding Flux, Saw Flux from Welding Flux Sj101 for Spiral Steel Pipe, Structural Steel Fabrication

Model NO.
LH-SJ101
Application
Submerged-arc Welding
Manufacturing Method
Sintering
Aws Specification
Aws A5.17 F7a2-Em12k F7A4-Eh14
Equivalent to
Esab Ok 10.71
En Specification
En760 SA Fb 1 55 AC H5
Standard Package
Kraft Bag with Plastic Lining Inside
Quality System
ISO9001:2008
Trademark
PANDING
Transport Package
Kraft Bag with Plastic Lining Inside
Specification
25kg/bag, 40bags/plywood pallet
Origin
Laiwu, Shandong Pr. China
HS Code
38109000
Model NO.
LH-SJ101
Application
Submerged-arc Welding
Manufacturing Method
Sintering
Aws Specification
Aws A5.17 F7a2-Em12k F7A4-Eh14
Equivalent to
Esab Ok 10.71
En Specification
En760 SA Fb 1 55 AC H5
Standard Package
Kraft Bag with Plastic Lining Inside
Quality System
ISO9001:2008
Trademark
PANDING
Transport Package
Kraft Bag with Plastic Lining Inside
Specification
25kg/bag, 40bags/plywood pallet
Origin
Laiwu, Shandong Pr. China
HS Code
38109000
Welding Flux Sj101 for spiral steel pipe, structural steel

Descripton:
LH-SJ501 is a bonded type acid flux composed mainly of aluminium and oxides with ball form granule about 10-60 mesh in size.Its basicty is 0.5-0.8.It can be used on AC or DC power source.It provides good welding usability,easy slag removal,excellent anti-porosity property and beautiful bead appearance.

Application:
In combination with H08A or H08MnA wire,this flux is suitable for welding of gascylinders,membrane water-cooled wall of boilers,ect.

Characteristics:
1)LH-SJ501 is an agglomerated aluminate- rutile type flux.

2.)Metallurgical behavior: High silicon and manganese pick- up is obtained.

3)Grain size: 10 to 60 mesh.Basicity: 0.7( BIIW).

4) The welding performance is excellent.
Slag detachability is very good, especially at high speed.
Welding porosity scarcely occur.

5.)Its welding speed can travel up to 150 cm/ min. It is particularly useful for welding tube- web- tube joints of finned tubes.

6)LH-SJ501 is useful for welding thin plate in single pass and limited pass.

7)The flux has low moisture pick-up  and granular stability . As the bulk density is low so is the consumption rate.

Caution:
1.Damp flux should be re-dried at 300-350 Centigrade for 2 hours.
2.Rust, grease and moisture on the weldment should be removed before welding.

Chemical Composition(%)
SiO2+TiO2Al2O3+MnOCaF2SP
25-3550-605-10≤0.05≤0.05
 
Mechanical Performance of the Deposited Metal

Wires
Standard Models		Yield
Point
Rel(MPa)		Tensile
Strength
Rm(MPa)		Elongation
A
(%)		Impact Value
  Kv2(J)
 
EL8
EL12
EM12K		F6Az-EL8
F7A0-EL12
F7A2-EM12K		≥330
≥330
≥410		≥415
≥420
≥500		≥22
≥22
≥22		≥27(0ºC)
≥53(-18ºC)
≥45(-200ºC)

Products Picture:
Welding Flux Sj101 for Spiral Steel Pipe, Structural Steel FabricationCompany Brief Introduction
(1)Company Name:Shandong Hulin Welding Material Co.,Ltd
(2)Main Products:
    SAW Flux&Wire, MIG Wire, FCW wire.
(3)Best Selling Product Models:
    SAW Flux:SJ101,SJ101G,SJ102,SJ301,SJ501,HJ107,HJ260,HJ431
    SAW Wire: EM12K,EL8,EL12
    MIG Wire: ER70S-6
    FCW Wire: E71T-1 
(5)Quality System:ISO9001:2000
(6)Year Established:1999
(7)Brand Name:Panding Brand
(8)Application: Steel Pipe, Structural steel, LPG Cylinder, Pressure vessel, Boiler, Bridges etc.
Packing & Shipping Details:
(1)Bag:25 KGS/Kraft Bag With Plastic Lining Inside
(2)Pallet:40 Bags(1 Ton)/Plywood Pallet
(3)Container:20-24 Tons/Container
(4)OEM & buyer label is ok, and technical support can be offered

Welding Flux Sj101 for Spiral Steel Pipe, Structural Steel Fabrication

Customers Feedback:
Welding Flux Sj101 for Spiral Steel Pipe, Structural Steel FabricationWelding Flux Sj101 for Spiral Steel Pipe, Structural Steel Fabrication

 
 


 

You Might Also Like