China 24V2.5A 60W UPS Battery Battery Backup Charger with Ce FCC Approve, Find details about China UPS Power Supply, UPS Power Supply Unit from 24V2.5A 60W UPS Battery Battery Backup Charger with Ce FCC Approve
Model | SC-60-12 | SC-60-24 | |||
output | DC voltage | CH1:13.8V | CH2:13.4V | CH1:27.6V | CH2:26.5V |
Voltage tolerance | ±2% | ----- | ±1% | ----- | |
Rated current | 4.0A | 0.5A | 2.0A | 0.3A | |
Current range | 0~4.0A | ----- | 0~2.0A | ----- | |
Rated power | 55W | 55W | |||
Ripple&noise | 120mvp-p | ----- | 120mvp-p | ----- | |
DCvoltage ADJ.range | CH1:11.3~14.9V | CH1:21.3~29.8V | |||
Setup,rise,hold time | 800ms,50ms,80ms/230VAC, 1600ms,50ms,16ms/115VAC | ||||
input | Voltage range | 90~264VAC,127~370VDC | |||
frequency | 47~63HZ | ||||
AC current | 0.9A/115VAC,0.45A/230VAC | ||||
efficiency | 81% | 83% | |||
Inrush current | Cold start current 25A/115VAC,45A/230VAC | ||||
Leakage current | < 1mA/240VAC | ||||
protection | Over load | Rated output power110%~150% start over load protection | |||
protection mode: AC charging mode:hiccup mode auto-recovery after fault condition is removed | |||||
Batteryprotection At low voltage | 9.5~11V | 20~22V | |||
protection mode:cutoff output | |||||
Function | UPS introduction | long-term online floating charge to battery,high charging efficiency,battery can saturate to more than 90% ,cauto-stop charging when it's full,prevent over charging. Effectively extend battery life,AC/battery auto switch ,no switch time,no need human guard, cold-start ,when there is no AC input ,can use battery start UPS,Meet the user's emergency needs | |||
environment | Working temp,humidity | -10ºC~+60ºC,20%~90%RH | |||
Storagetemp,humidity | -20ºC~+85ºC,10%~95%RH non-condensing | ||||
Withstand vibration | 10~500HZ,2G10min/1cycle,period for 60 minutes,each axes | ||||
safety | Withstand voltage | I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC | |||
Isolated resistance | I/P-O/P,I/P-FG,O/P-FG:100Mohms/500VDC | ||||
Fitstandard | Safety standard | Compliance to UL60950-1 | |||
EMC standard | Compliance to EN55022,CLASSB | ||||
others | Dimension | 111*78*36mm (L*W*H) | |||
Weight/packing | 0.3kg/50pcs/16kg/0.027m³/0.96CUFT | ||||
note | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and25ºCof ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. |