Products

Jacking System for Large Tonnage Chassis Assembling

China Jacking System for Large Tonnage Chassis Assembling, Find details about China Jack, Hydraulic Jack from Jacking System for Large Tonnage Chassis Assembling

Model NO.
LTL
Condition
New
Trademark
Haolida
Specification
ISO
Origin
Qingdao, Shandong
HS Code
8425429000
Model NO.
LTL
Condition
New
Trademark
Haolida
Specification
ISO
Origin
Qingdao, Shandong
HS Code
8425429000

General Introduction

Large-tonnage Chassis Assembling Jacking System is mainly used for assembling and maintenance work of special engineering vehicle chassis. It is composed of six jacks, it can be used with 4 units together, it is controlled by a control cabinet, and can be wireless remote controlled.

Technical parameter

  • Lifting force: front jacks- 400KN/group; middle, back jacks-400KN/group
  • The minimum working height: front jacks-400mm; middle, back jacks-900mm
  • The maximum working height: front jacks-1250mm; middle back jacks- 1550mm
  • Rising speed: front, middle, back 0-350mm/min(adjustable)
  • Descending speed: front, middle, back 0-750mm/min(adjustable)
  • The distance between baseboard and ground when the middle and back jacks are no-load: 6-8mm
  • Rated working pressure of hydraulic units: front jacks-16Mpa; middle and back jacks: 16Mpa
  • Power source/frequency: 380V 50HZ
  • Oil pump motor power: 2.2KW
  • Working voltage of solenoid directional valve: 220V
  • Limit switch voltage: 24V DC
  • Signal generator voltage: 24V DC
  • Effective working distance of remote control: 50M
  • Remote control battery: 5#x2x1.5V
  • Overall sizes( Length x Width x Height)

          Front jacks: 1200×800×1260mm (not including the front beam)
          Back jacks: 1200×630×900mm
          Control cabinet: 800×650×1400mm
Jacking System for Large Tonnage Chassis Assembling

You Might Also Like