Manufacturing Precision Standards : Japanese JIS 1 Class
1. Parameters
1) XTS 200ton ~600ton Parameters
| Name | Unit | XTS-200 | XTS-300 | XTS-400 |
| Capacity | ton | 200 | 200 | 300 | 300 | 400 | 400 |
| Rated tonnage point | mm | 4 | 7 | 9 | 7 | 9 | 7 |
| Stroke | mm | 40 | 250 | 300 | 250 | 300 | 200 |
| Speed changing | s.p.m | 60-130 | 20-40 | 20-35 | 20-35 | 15-30 | 20-35 |
| Die height | mm | 350 | 550 | 650 | 550 | 600 | 650 |
| Maximum counterbalancer capacity | kg | 1000 | 1200 | 1500 | 1500 | 1500 | 1500 |
| Slide adjustment | mm | 100 | 150 | 150 | 150 | 150 | 150 |
| Slide area | mm | 900x800 | 900x800 | 1000x900 | 1000x900 | 1100x1100 | 1100x1100 |
| Bolster area | mm | 1000x900 | 1000x900 | 1100x1000 | 1100x1000 | 1200x1200 | 1200x1200 |
| Bolster thickness | mm | 170 | 170 | 200 | 200 | 200 | 200 |
| Side opening | mm | 400x400 | 400x400 | 400x500 | 400x500 | 400x500 | 400x500 |
Height of the top surface of
bed from floor level | mm | 850 | 850 | 850 | 850 | 1090 | 1090 |
| Work energy | kgxm | 800 | 1500 | 3000 | 2500 | 3600 | 2800 |
| Main Motor | Hpxp | 30x4 | 30x4 | 30x4 | 30x4 | 30x4 | 30x4 |
| Slide adjusting moter | kwxp | 2x4 | 2x4 | 2x4 | 2x4 | 2x4 | 2x4 |
| Frame structure | | one piece frame | tie rod type |
| Name | Unit | XTS-500 | XTS-600 |
| Capacity | ton | 500 | 500 | 600 | 600 |
| Rated tonnage point | mm | 13 | 7 | 7 | 13 |
| Stroke | mm | 350 | 250 | 250 | 350 |
| Speed changing | s.p.m | 10-25 | 15-30 | 15-25 | 15-20 |
| Die height | mm | 650 | 700 | 700 | 650 |
| Maximum counterbalancer capacity | kg | 1500 | 1500 | 1500 | 1500 |
| Slide adjustment | mm | 150 | 150 | 150 | 150 |
| Slide area | mm | 1200x1200 | 1200x1200 | 1200x1200 | 1200x1200 |
| Bolster area | mm | 1300x1200 | 1300x1200 | 1300x1200 | 1300x1200 |
| Bolster thickness | mm | 220 | 220 | 240 | 240 |
| Side opening | mm | 500x650 | 500x650 | 500x650 | 500x650 |
Height of the top surface of
bed from floor level | mm | 1200 | 1200 | 1350 | 1350 |
| Work energy | kgxm | 7000 | 3800 | 5000 | 8000 |
| Main Motor | Hpxp | 30x4 | 30x4 | 30x4 | 30x4 |
| Slide adjusting moter | kwxp | 3x4 | 3x4 | 3x4 | 3x4 |
| Frame structure | | tie rod type |
2) 3 in 1 servo Straightener Feeder---MAC4:
| Model | MAC4-400 | MAC4-600 | MAC4-800 | MAC4-1000 | MAC4-1300 |
| Stock Width(mm) | 70~400 | 70~600 | 70~800 | 70~1000 | 70~1300 |
| Stock Thickness(mm) | 0.6~6.0 | 0.6~6.0 | 0.6~6.0 | 0.6~6.0 | 0.6~6.0 |
| Max. Coil Weight(kg) | 5000 | 5000 | 7000 | 7000 | 7000 |
| Max. Coil O.D.(mm) | 1400 | 1400 | 1400 | 1400 | 1400 |
| Coil I.D.(mm) | 508 | 508 | 508 | 508 | 508 |
| Feed Length(mm) | ~500 | ~500 | ~500 | ~500 | ~500 |
| Max. Line Speed(m/min) | 16~24 | 16~24 | 16~24 | 16~24 | 16~24 |
| Work Roll Number | upper4/lower3 | upper4/lower3 | upper4/lower3 | upper4/lower3 | upper4/lower3 |
| Feed Roll number | 1 | 1 | 1 | 1 | 1 |
| Main Motor(kw) | AC5.5 | AC7.5 | AC7.5 | AC11.0 | AC11.0 |
| Mandrel Expansion | hydraulic | hydraulic | hydraulic | hydraulic | hydraulic |
| Reel Motor(kw) | 2.2 | 2.2 | 3.7 | 3.7 | 3.7 |
| Power (V) | 3Phase 220V/380V/50HZ |
| Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 | 0.49 |
3 in 1 servo Straightener Feeder---MAC5:
| Model | MAC5-600H | MAC5-800H | MAC5-1000H | MAC5-1300H |
| Stock widthl (mm) | 100-600 | 100-800 | 100-1000 | 100-1300 |
| Stock Thickness (mm) | 0.8-9.0 | 0.8-9.0 | 0.8-9.0 | 0.8-9.0 |
| Coil Weight(kg) | 5000 | 7000 | 10000 | 10000 |
| Max Coil O.D.(mm) | Φ 1400 | Φ 1400 | Φ 1400 | Φ 1400 |
| Coil I.D.(mm) | Φ 508 | Φ 508 | Φ 508 | Φ 508 |
| Feed Length (mm) | 0-500 | 0-500 | 0-500 | 0-500 |
| Max Speed (m/min) | 22 | 22 | 22 | 22 |
| Work Roll | Upper 5/Lower 4 | Upper 5/Lower 4 | Upper 5/Lower 4 | Upper 5/Lower 4 |
| Feed Roll | Upper 1/Lower l | Upper 1/Lower l | Upper 1/Lower l | Upper 1/Lower l |
| Main Motor(kw) | AC22 | AC22 | AC30 | AC30 |
| Uncoil Expansion | Hydraulic | Hydraulic | Hydraulic | Hydraulic |
| Uncoil Motor(kw) | 5.5 | 7.5 | 11 | 22 |
| Power (V) | AC380/50HZ | AC380/50HZ | AC380/50HZ | AC380/50HZ |
| Primary Air (Mpa) | 0.5 | 0.5 | 0.5 | 0.5 |
3 in 1 servo Straightener Feeder---MAC6:
| Model | MAC6-600H | MAC6-800H | MAC6-1000H |
| Stock width (mm) | 100-600 | 100-800 | 100-1000 |
| Stock Thickness (mm) | 2.0-12 | 2.0-12 | 2.0-12 |
| Coil Weight Max. (Max.)(kg) | 7000 | 7000 | 10000 |
| Coil O.D.Max.(mm) | 1400 | (D1400 | 0 1400 |
| Coill.D.(mm) | 0 508 | 508 | 0)508 |
| Feed Length (mm) | 1-500 | 1-500 | 1-500 |
| Line Speed Max. (Max.)(m/min) | 16 | 16 | 16 |
| Number of Work Rolls | Upper 3 / Lower 3 | Upper 3 / Lower 3 | Upper 3 / Lower 3 |
| Number of Feed Rolls | Upper 1 / Lower 1 | Upper 1 / Lower 1 | Upper 1 / Lower 1 |
| Main Motor (kw) | AC22 | AC30 | AC37 |
| Mandrel Expansion | Hydraulic | Hydraulic | Hydraulic |
| Reel Motor (kw) | 7.5 | 7.5 | 11 |
| Power Supply (v) | AC380/50HZ | AC380/50HZ | AC380/50HZ |
| Operating Air (Mpa) | 0.5 | 0.5 | 0.5 |
Product Features:
* Combined with European, American, and Japanese advanced technologies/adopt functional structure/ CAE dynamic simulation optimization design
* High-rigidity and high-quality steel welding or whole frame casting for tempering/ vibration stress processing
* High-standard fabrication processing for key parts of gears and bent axles for hard chrome plating/nitriding/grinding
* High-performance configurations such as controllers/drive parts/electromagnetic clutches/ pneumatic elements and bearings
* Technical grade of international stamping equipment and high inspection index.
* High-response multi-functional superposition expansion/high-quality industrial control processor
* High-memory module/individual design franchised software compilation
* High-compatibility multi-axial variable speed drive/automation equipment onboard expansion
* High-intelligent human-computer interface/high-frequency real-time control/Ethernet & USB interface
Standard Configuration:
* Hydraulic overload protector
* Electric slider adjusting device
* Digital moulding-height indicator(unit: 0.1 mm)
* Slider and mould balancing device
* Rotary cam switch
* Crank angle indicator
* Circulation centralization lubrication oil feeding device
* Electromagnetic stroke counter
* Over-run safety device
* Programmable controller
* Moveable T-type operating floor
* Air source connector
* Independent electric control cabinet
* Maintenance tool and tool box
Optional Configuration:
* Die cushion
* Upper slider knock out device
* Die Light
* Main motor inversion device
* Photo-electric safety device
* Safety groove and safety pin
* Pre-set counter (6 digits)
* Loading inspection device
* Misfeed detection consent
* Frequency converter
* Basic bolt and soleplate
* Anti-vibration foot
* Safety shelf and safety ladder
* Power socket
* Quick die change device