Physical Treatment of Wastewater Chemical Sludge Treatment Sludge Dryer
China Physical Treatment of Wastewater Chemical Sludge Treatment Sludge Dryer, Find details about China Sludge Treatment, Wastewater Treatment from Physical Treatment of Wastewater Chemical Sludge Treatment Sludge Dryer
Basic Info.
Model NO.
BOE5000/10000/15000/20000/25000/30000/35000/YR
After Sale Service
Engineers Available
Delivery Time
35 Days Against Down Payment
Package
Package Poly Wooden Case
Inlet Sludge Solid Content
80-85%
Outlet Cake Moisture Content
10%-30%
Electrical Component
Schneider/Omron/Customize
Protection Level
IP 55
Trademark
BOEEP
Transport Package
Plywood Case
Specification
According to the model
Origin
China Jiangsu
HS Code
841939909
Model NO.
BOE5000/10000/15000/20000/25000/30000/35000/YR
After Sale Service
Engineers Available
Delivery Time
35 Days Against Down Payment
Package
Package Poly Wooden Case
Inlet Sludge Solid Content
80-85%
Outlet Cake Moisture Content
10%-30%
Electrical Component
Schneider/Omron/Customize
Protection Level
IP 55
Trademark
BOEEP
Transport Package
Plywood Case
Specification
According to the model
Origin
China Jiangsu
HS Code
841939909
Product Desciption
Jiangsu BOE Environmental Protection Technology Co., Ltd. and Xi'an Jiaotong University have jointly developed a complete set of intelligent low-temperature sludge drying technology, which has yielded fruitful results. It has successively launched a low-temperature sludge belt dryer, a low-temperature sludge waste heat dryer, and a low-temperature sludge Box-type dryers and other models have advanced technology and remarkable treatment effects. Two invention patents have been declared.
Sludge heat pump drying airflow optimization system
Air outlet drainage sludge drying system based on heat pump technology.
Low temperature drying-the best solution for sludge drying reduction.
The low-temperature sludge drying equipment developed by BOE environmental Protection can directly dry sewage or sludge with a moisture content of less than 83% to dry sludge with a moisture content of 10%-30%. The reduction can be as high as 90%, and the effective sterilization can be as high as 90%. Low energy consumption, no pollution, widely used in municipal sludge and industrial sludge (printing and dyeing, papermaking, electroplating, chemical industry, leather, pharmacy, etc.) for drying reduction. Dry sludge with 10%-30% moisture content can be gasified later , Mixed burning, composting, or building materials and other harmless resource disposal.
Low temperature drying principleThe low-temperature sludge drying equipment independently developed by BOE Environmental Protection uses the principle of low-temperature heat pump dehumidification and uses convection hot air drying to reduce the amount of wet sludge on the mesh belt. The whole set is the same as a fully enclosed type. Design, dry hot air without heat loss.
Dehumidification heat pump principle
The refrigeration system is used to cool and dehumidify the humid air from the drying room, and at the same time recover the latent heat of moisture condensation to reheat the dry air. It is a combination of dehumidification (dehumidification and drying) and heat pump (energy recovery), and is the recycling of energy in the drying process.
Innovative Technology
Four-effect technology, twice the industry standard
Four-effect condensation dehumidification drying technology is an advanced sludge drying reduction technology. It has significant advantages such as lower air outlet temperature, better drying capacity and efficiency, and more economical operating costs; adopts "four-effect condensation dehumidification and drying" equipment, and the comprehensive dehumidification performance ratio (SMER) is as high as 4kg.H2O/kw.h or more , The moisture content of dry mud is reduced to 10%-30%, which is more than 50% energy-saving than traditional low-temperature drying, which is twice the industry standard.
A variety of molding technologies, comprehensive energy efficiency leading 40%.
Based on years of successful experience, different types of wet mud, and different moisture content, different molding technologies are used to reduce the drying time of wet mud, and the comprehensive energy efficiency is 40% ahead of the industry.
Wide range of applications
1.It can be widely used in the drying treatment of various types of sludge in municipal administration, printing and dyeing, papermaking, electroplating, chemical industry, leather, etc.;
2.The daily dehumidification and water removal capacity of a single device ranges from 200 kg to 50 tons, and all models can meet;
3.Electric energy can be used directly, or energy such as steam and waste heat can be used;
4.It can be "centralized treatment" or "decentralized treatment" to meet the requirements of sludge disposal policies in different regions;
5. It is not affected by the external environment temperature (low temperature in winter) and humidity (humidity in summer), suitable for use in various regions;
Safe and harmless
1. Fully-enclosed low-temperature operation at 40-75ºC, no nitrogen filling operation required;
2. During the drying process, the oxygen content is less than 12%, the dust concentration is less than 60g/m3, the particle temperature is less than 70ºC, and there is no danger of dust and explosion;
3. The sludge is statically spread, and there is no mechanical electrostatic friction with the contact surface;
4. There is no "sticky phase" stage of the urban sludge drying process (about 60%);
5. The dry material is in granular form and there is no danger of dust;
6. The discharging temperature is low (<50ºC), no cooling is needed, and it is stored.
High efficiency reduction
1. It can directly dry the sludge with a moisture content of 83% to 10% without disposing in stages;
2. There is no loss of organic components in the drying process, and the dry material has a high calorific value, which is suitable for later resource utilization;
3. The reduction can be as high as 80%, which can save a lot of later transportation costs; 4. Using Pasteur (pasteurization) sterilization method-low temperature heat sterilization, the drying temperature is above 70 ºC for 90 minutes to 120 minutes, and the effective sterilization is as high as 90%;
Skills design
1. Adopt heat pump heat recovery technology, closed drying mode without any waste heat emission;
2. 80% wet mud is dried to 60% per ton, and the comprehensive power consumption is 125kw.h;
3. 80% wet mud is dried to 10% per ton, and the comprehensive power consumption is 200kw.h;
4. 4 kg of water can be removed per 1 kilowatt-hour of electricity (the dehumidification performance ratio is 1:4kg.H2o/kw.h);
Environmentally friendly and odorless
1. The entire equipment system adopts a closed design, no odor overflows, and no complicated deodorizing device is required;
2. Using low temperature drying process, the amount of H2S and NH3 precipitation is greatly reduced;
3. Condensate (sludge moisture) is easy to dispose of and can be discharged directly;
4. Adapt to sewage plants in urban areas, villages and scenic spots;
Economic savings
1. It occupies a small area, with an average treatment area of about 4m2 per ton of wet mud;
2. It can be installed in the basement to save land area;
3. No complicated civil structures and infrastructure, saving civil construction costs;
4. The equipment is simple to install, and the installation and debugging cycle is short, saving time and cost;
Smart operation
1. The equipment runs fully automatically, saving a lot of labor costs;
2. "PLC+touch screen" intelligent control can realize remote centralized control;
3. The moisture content of the discharge material can be adjusted arbitrarily (10%-50%);
Stable and durable
1. The use of corrosion-resistant materials such as stainless steel, and the heat exchanger with electroplating anti-corrosion treatment, have a long service life;
2. There is no mechanical wear during operation, and the service life is more than 15 years;
3. No vulnerable and consumable parts, easy to use and manage;
Low temperature waste heat sludge drying machine
Features
★ 10%-30% moisture content, reduction can reach more than 80%
★ 1:4 dehumidification ratio, twice the industry standard
★ No odor emission, no need for deodorization device
★ No heat loss, 100% heat utilization
★ Operating cost as low as 180kw.h/T
★ Low temperature is safer and no dust hazard
Process flow chart
Model Selection
| Model | BOE5000YR | BOE10000YR | BOE15000YR | BOE20000YR | BOE25000YR |
| Standard water removal capacity/24h | ~5000kg | ~10000kg | ~15000kg | ~20000kg | ~25000kg |
| Water removal capacity/h | ~208kg | ~416kg | ~624kg | ~832kg | ~1040kg |
| Operation power | 13kw | 26kw | 39kw | 52kw | 65kw |
| Standard heating power | 200kw | 400kw | 600kw | 800kw | 1000kw |
| Hot water flow capacity | 8.6m³/h | 17.2m³/h | 25.8m³/h | 34.4m³/h | 43m³/h |
| Standard cooling flow capacity | 180kw | 360kw | 540kw | 720kw | 900kw |
| Cooling water flow △t=12ºC | 13m³/h | 26m³/h | 39m³/h | 52m³/h | 65m³/h |
| Heat exchange modules quantity | 1set | 2set | 3set | 4set | 5set |
| External structure mm | 4900*3110*3200 | 8150*3110*3200 | 11400*3110*3200 | 14650*3110*3200 | 17900*3110*3200 |
| Structure type | whole package | assemble package | assemble package | assemble package | assemble package |
| Weight | 5.7t | 8.6t | 12.3t | 14.8t | 16.5t |
| Note | 1 Module Double layer | 2 Module Double layer | 3 Module Double layer | 4 Module Double layer | 5 Module Double layer |
| Model | BOE30000YR | BOE35000YR | BOE40000YR | BOE45000YR | BOE50000YR |
| Standard water removal capacity/24h | ~30000kg | ~35000kg | ~40000kg | ~45000kg | ~50000kg |
| Water removal capacity/h | ~1248kg | ~1458kg | ~1667kg | ~1875kg | ~2083kg |
| Operation power | 78kw | 91kw | 104kw | 117kw | 130kw |
| Standard heating power | 1200kw | 1400kw | 1600kw | 1800kw | 2000kw |
| Hot water flow capacity | 51.6m³/h | 60.2m³/h | 68.8m³/h | 77.4m³/h | 86m³/h |
| Standard cooling flow capacity | 1080kw | 1260kw | 1440kw | 1620kw | 1800kw |
| Cooling water flow △t=12ºC | 78m³/h | 91m³/h | 104m³/h | 117m³/h | 130m³/h |
| Heat exchange modules quantity | 6set | 7set | 8set | 9set | 10set |
| External structure mm | 21500*3110*3200 | 24400*3110*3200 | 27650*3110*3200 | 30900*3110*3200 | 34150*3110*3200 |
| Structure type | assemble package | assemble package | assemble package | assemble package | assemble package |
| Weight | 20.4t | 23.4t | 26.3t | 29.3t | 32.2t |
| Note | 6 Module Double layer | 7 Module Double layer | 8 Module Double layer | 9 Module Double layer | 10 Module Double layer |
Related parameters Specification
| Standard heating condition | 90ºC/70ºC(hot water etc.) |
| Cooling condition | 33ºC/45ºC(cooling water) |
| Power supply | (220V\380V\440V)/3H/50Hz(60Hz) |
| Standard drying temperature | 50~65ºC(return air)/65~85ºC(air supply) |
| Heat source | Flue gas waste heat (heat exchanger), steam condensate, generator waste heat, anaerobic digestion (gas to hot water) sludge cracking, gasification and combustion to produce hot water, etc. |
| Control system | Touch screen+PLC Programmable Controller |
| Application scope of wet sludge | Moisture content (40%-83%)(Different water content has different adaptability) |
| Dry sludge moisture | Frequency conversion adjustment, moisture content(10%-60%)(The adjustment range of the moisture content of the dry sludge will be different according to the different moisture content of the mud ) |
| Forming method | Cutting and extruding (different moisture content and sludge properties should be suitable for selection) |
About us
FAQ
------------------------------------------------------------------------------------------------------------------------------------------------------
Q: Are you trading company or manufacture?
A: We are both manufacture and trading company. We have over 20 years' professional experience as a waste water treatment equipment manufacturer and engineering service enterprise.
Q: Where is your factory located?
A: Yangzhou City, which is very close to Shanghai with only less than 3 hours' driving.
Q: Do you provide OEM service?
A: Yes. Any required logos is available.
Q: How about the production capacity of your company?
A: Our factory covers area over 20,000M2 and produces machines 2000 sets per year.
Q: How could we trust you and your company? This is first time transaction?
A: Our company has more than 20 years professional experience. We cooperate over 1000 customers in China and overseas. We export nearly 40 countries all over the world. Welcome to our company and watch our plant production condition any time.
Q: What certificates do you have?
A: CE/ISO/SGS
Q: Do you offer after-sales service?
A: Yes. Engineers available.
Q: How long is your warranty?
A: One year after the arrival of the goods. During this period, as long as it is not a man-made damage, we send the damaged parts free of charge.
Q: What about your delivery Time?
A: Normally within 45 days against down payment.
Q: What about the package of your export product?
A: We use anticorrosion wooden case with foam inside.
Q: What kind of payment do you accept?
A: T/T, L/C, PAYPAL, Cash, D/P, D/A, WESTERN UNIION, MONEYGRAM
Q: What kind of transportation do you offer?
A: Customers decide freight mode, Air, Land & Sea .
You Might Also Like
Triac 0-10V Dali Dimmable Recessed LED Downlight/ COB LED Ce......
GMP Factory Supply Food Grade Phycocyanin Spirulina Extract
Table Tennis Racket with Rubber + Bag Ping Pong Bat
3mh Cool Giant Fat Inflatable Cat Cartoon for Advertising
Mslfp14 17*17 Wired Box Size X-ray Digital Flat Panel Detect......
Portable Glass Shape Edge Polishing Machine
A4 A3 Paper Wrapping Machine
Stainless Steel Angle Tube Strainer
Sinchold 9220/20/45 Forged Steel Welded Crane Rail Clips
Warehouse Tent Made by Superb Tent
Thyristor Rectified CO2 MIG Mag Arc Welding Machine