China Automatic Transformer Ratio Tester 3 Phase Transformer Turns Ratio Test Set, Find details about China TTR Tur Ratio Test, Transformer Turn Ratio Tester from Automatic Transformer Ratio Tester 3 Phase Transformer Turns Ratio Test Set
I.Introduction:
Before the new transformer running into operation,the transformer turns ratio or voltage ratio need to be tested to check the correctness of the transformer turns ratio, tap situaton,whether interturn short circuit, whether the transformer can operate in parallel.The traditional ratio bridge is not intuitive readings, to be converted, can only be measured by phase. ZS6810 ratio tester overcome the traditional shortcomings of the bridge test,Simple and intuitive operation, can complete threephase variable ratio or turns ratio test by once, fast, high accuracy.
II.Features:
1, test range, 0.9-10000.
2, fast test speed, 10 seconds to complete the three-phase testing.
3, Widely applicable to the type of transformer, with Z shaped coupling transformer test function.
4, auto-complete group testing.
5, Perfect protection function high-low pressure reverse protection, short circuit protection between the transformer turns.
6, After entering the nominal parameters, automatically measure transformer turns ratio, bit error value and tap
7, Printer output measurements, English menu display, large color LCD screen.
8, Highest measurable tap transformer with 99 bits.
III.Parameter:
Active part | Voltage testing range: 0-10V Current testing range: 0-10A |
Accuracy | voltage:±0.5%current:±0.5% |
Working temperature | -10ºC~ +40ºC |
Power | AC160V~260V |
Size | 32cm×24cm×13cm |
Weight | 32cm×24cm×13cm |
IV.Detailed Photos