Products

Blend Polyol Rigid Polyurethane Foam Raw Material for Pipe Insulation

China Blend Polyol Rigid Polyurethane Foam Raw Material for Pipe Insulation, Find details about China Polyether Polyol, Polyurethane Foam from Blend Polyol Rigid Polyurethane Foam Raw Material for Pipe Insulation

Model NO.
SD2104
Gel Time
100-120s
Rise Time
160-200
Physical Properities
35~46kg/M3
Compressive Strength
200~300kpa
Trademark
SHUNDA
Transport Package
Iron Drum
Specification
250kg
Origin
China
HS Code
39072090
Model NO.
SD2104
Gel Time
100-120s
Rise Time
160-200
Physical Properities
35~46kg/M3
Compressive Strength
200~300kpa
Trademark
SHUNDA
Transport Package
Iron Drum
Specification
250kg
Origin
China
HS Code
39072090
Blend Polyol SD2104 For Pipe Insulation
Blend Polyol Rigid Polyurethane Foam Raw Material for Pipe InsulationSDB10F is a kind of blend polyol of whole water system used in pipe insulation. This kind of product use zero ozone depleting blowing agent (0 ODP), SDB10F use CO2 as the blowing agent, which produced through the reaction of water and isocyanate. Every performance of SDB10F finished foam products can meet the requirements of GB/T29047 standard.
The foam produced has the characteristics as following:
  1. Water blowing agent, environmental protection, zero ozone depleting blowing agent(0 ODP).
  2. Every performance of the foam product meets the requirements of GB/T29047 standard.
  3. Every performance of the foam product is very stable.
TYPICAL PHYSICAL PROPERTIES
Physical Properities Test MethodMetricValue
Core DensityGB/T 6343-2009kg/m3≥60
Radial Compressive StrengthGB/T 8813-2008MPa≥0.3
Initial Thermal Conductivity(50°C)GB/T 10294-2008W/(m·K)≤0.033
Close Cell ContentGB/T 10799-2008%≥88
Water AbsorptionGB/T 8810-2005%≤10
Air bubblesGB/T 29047mm1/3Insulation Thickness.
Average cell size.GB/T 29047mm≤0.5

Importance: The above mentioned are typical test values, and the specific data may vary slightly due to environmental conditions.For our products, the data are not legally binding.
Blend Polyol Rigid Polyurethane Foam Raw Material for Pipe InsulationBlend Polyol Rigid Polyurethane Foam Raw Material for Pipe InsulationBlend Polyol Rigid Polyurethane Foam Raw Material for Pipe InsulationBlend Polyol Rigid Polyurethane Foam Raw Material for Pipe InsulationShunda Company founded in year 1996, is a leading manufacturer of rigid PU foam blend polyol System material, our annual sales reached 50,000 MT in the past three years. We have four Manufacturer plants in Yantai, Linyi, Dalian and Chang chun with totally more than 400 employees by now. For over 20 years development, Yantai Shunda Polyurethane Co., Ltd has grown up into a modern joint-stock enterprise, which has the research, development, production and operation for the series of rigid polyurethane foam production. We are also the largest global distributor of MDI series of Wanhua Chemical. Depending on our own strong R&D capability,professional purchasing team, quality control ability and full MDI series product supply, we could supply all series of PU raw material to the internal and abroad customers and undertake the engineering of the insulation project.

Yantai Sanjing Chemical Industry Materials Co., Ltd is established in 2010 by Shunda Group as its International sale company, its mainly engaged in Blend polyol, Polyetherpolyol, flameretardants, PU catalysts, Polymeric MDI and other raw materials which are widely used for the insulation of wall and roof building, coldstorage, ship, sandwichpanel, refrigerators, freezers, pipelines, garage door and etc.


Blend Polyol Rigid Polyurethane Foam Raw Material for Pipe InsulationBlend Polyol Rigid Polyurethane Foam Raw Material for Pipe InsulationBlend Polyol Rigid Polyurethane Foam Raw Material for Pipe InsulationBlend Polyol Rigid Polyurethane Foam Raw Material for Pipe Insulation
Other unmentioned matters and TDS&MSDS.Please visit our official website shundapu.en.made-in-china.com
Or please contact us for information:
 
 

You Might Also Like