Wingstel Dual Band 4G Mobile Signal Amplifier From China, Find details about China Repeater, Signal Booster from Wingstel Dual Band 4G Mobile Signal Amplifier From China
New design Dual band 3G 4G Mobile Signal Booster for Americas
A mobile phone signal repeater provides the ultimate solution in any area where cellular communications can not work well due to lack of signals. The repeater device features easy installation & operation, build-in indoor antenna and no interference. It could also improve indoor electromagnetism environments, protract cellular battery life and reduce radiation of cellphones. A mobile phone repeater is ideal for house, home, office use.
Introduction To Mobile Phone Signal Repeater |
1. Enhance Mobile Phone Signal Strength |
2. Improve Communication Quality |
3. Reduce Cellphone Radiation |
4. Protract Cellular Battery Life |
5. Economic Building Cost |
6. Easy Operation |
7. Easy Installation |
8. Build-in Power Supply |
The repeater makes the signal stronger in places with poor signal coverage such as:
1) Underground areas: basements, parking lots, tunnels;
2) Other places where cellular signal is shielded by metal or concrete walls: offices, supermarkets, cinemas, hotels;
3) Places distant from the BTS like private houses.
How does the Booster/Repeater Works?
Repeaters are designed to fulfill the idea of one and main principle: to fill the areas with the weak or bad signal and to amplify these low signals in order to provide you with the communication suitable for you.
Frequency | 850/1900MHz |
Frequency Range | Uplink 824-849MHz / 1850-1910MHz |
Downlink 869-894MHz / 1930-1990MHz | |
Gain | Uplink 60±3dBi |
Downlink 65±3dBi | |
Export Power | 23dBm±3dBm |
Power Supply | Input AC100V-240V 50/60Hz 0.6A |
Output 12V 2.0A | |
Size | 235 x 177 x 20 mm |
Weight | 1.2kg |
Coverage Area | 2000 square meters |
Pass Band Ripple | ≤3dBi |
I/O Impedance | 50Ω |
Connector Type | N female connector |
Noise Figure | ≤4dBi |
Transmission Delay | ≤0.5μs |
Ambient Temperature | -10ºC~60ºC |
Reliability | To the GB6993-86 standard |
Electromagnetic Compatibility | To the ETS300 694-4 standard |
Function | a) Power supply LED denote |
b) Export power LED denote |
Item | Quantity(Piece) |
Dual band WCDMA/PCS 850/1900MHz cellphone signal repeater | 1 |
Outdoor Log periodic antenna | 1 |
User manual | 1 |
Indoor ceiling antenna | 1 |
10m 50-5 Cable with connectors | 2 |
Power adaptor | 1 |
Installation steps:
1.Fix up outdoor antenna reception on housetop and point to signal tower.
2.Connect outdoor antenna to "outdoor" port in repeater machine through cable.
3.Connect indoor antenna(s) to "MOBILE" port in repeater through cable also.
4.Plug power adaptor into AC power socket and finish installation.
WCDMA/PCS 850/1900MHz Mobile signal booster Installation tips:
1.Please make sure the outdoor antenna is well isolated with the indoor antenna(s). They should not be on the same horizontal line. The outdoor antenna should be on the housetop, at least 10 meters far away from the indoor antenna(s), better with stairs or wall(s) in between. Put the indoor antenna(s) in the middle of room, far away from the window and door.
2. If still no signal reception after activating repeater, please check if outdoor antenna points to signal tower or elsewhere have strong signal and check if strength achieve -70dBm. Please adjust the direction of the outdoor antenna until it catches good and steady signal. To ensure the result, the outdoor signal should be as strong as possible.