Cable torsade 3x35+54.6mm2 Alu-1kV
 
conductors
 
The LV cable used for carrying out the work will be of insulated type, pre assembled rated voltage beams 0,6 / 1 kV.
The beam will consist of three phase conductors, a neutral conductor and two public ligHVing conductors (PE). The sections are specified in the following table:2x16mm2
 
Cables insulated conductors
 
These technical clauses specify the following cables insulated conductors:
- LV conductor cables for lines of LV networks
- LV cable conductors for LV circuit breakers transformers links,
- Cable connection LV drivers of public ligHVing fixtures,
LV networks will consist of insulated cables assembled in bundles composed as follows:
- 2 core phase conductors of an aluminum section 16 mm²
- without carrier neutral conductor core Almelec a section of 54.6 mm²
- without public ligHVing conductors aluminum core of a section of 16 mm²
 
Materials
 
Insulated cable assembled LV network to beam
The cable will meet the French standard NF C 33-209. The souls of the phase conductors and public ligHVing will consist of hardened aluminum son pure hard 3/4 99.5 M, Type 1370 (A5 / L) to the standard NF C 3 1-122, while core of the neutral conductor is formed of son alloy magnesium aluminum silicon, heat-treated, containing approximately 0.5% magnesium and 0.5% silicon.
Each driver of the beam will be insulated with cross-linked polyethylene extruded jacket black meets the dimensional and mechanical characteristics specified in the NFC 33-209 standards.