Products

Jbe BS5446 RF Module Dual Power Supply Hardwired Heat Alarm

China Jbe BS5446 RF Module Dual Power Supply Hardwired Heat Alarm, Find details about China Heat Alarm, Heat Detector from Jbe BS5446 RF Module Dual Power Supply Hardwired Heat Alarm

Model NO.
THS892A-HI
Alarm Volume (within 1m)
≥90dB
Receive Frequency
433.92MHz
Color
White
Trademark
JBE
Transport Package
Carton
Specification
140mm in diameter x 58.8mm depth
Origin
Zhejiang, China
HS Code
8531100000
Model NO.
THS892A-HI
Alarm Volume (within 1m)
≥90dB
Receive Frequency
433.92MHz
Color
White
Trademark
JBE
Transport Package
Carton
Specification
140mm in diameter x 58.8mm depth
Origin
Zhejiang, China
HS Code
8531100000
THS892-HI

Product Description:
The unit is a heat alarm. It can rapidly detect incremental temperature and give off warning under the condition that the environmental temperature between 54ºC-65ºC, in order to alert the dwelling of the dangerous situation and notice residents to evacuate right away. In the alarm mode, if the alarm is connected with other heat detectors, other alarms will also send alarm signals.

Product Parament:
Module NumberTHS892-HI
Power SupplyAC 220-240V with DC 9V back up
Heat Sensitivity54ºC to 65 ºC
Operation Current≤ 100mA with AC power
Comply with Standard                    BS 5446-2:2003
Alarm Volume>85dB(A) @ 3 meters
Hush Time8 mins
Product Life Time>10 years
Wired interconnectionUp to 40pcs
Humidity Range <93% relative humidity (RH)
Temperature Range0ºC to 65ºC
Plastic MaterialV0 level flame retardant ABS
Product Size140mm in diameter x 58.8mm depth

Product Features:
Rapidly detect heat alarm.
Certification test for BS 5446-2:2003.
AC220-240V/50-60Hz with DC9V battery backup, and low battery warning.
Low-Power feature, replaceable batteries.
At least five years battery service life.
Wired interconnection function, the maximum number of connection is up to 40 devices.

Product Function:
 Standby modeAfter the product is installed, if the heat alarm device is operating properly, the red LED Flashes once every 40 seconds.
Local Alarm modeWhen the heat alarm device detect the environmental temperature between 54 - 65ºC, the red LED will flash once per second with pulsating alarm until the hot air is removed.
 Interconnection alarm modWhen the heat alarm device detect the environmental temperature between 54 - 65ºC, the alarm will send local alarm signal, other interconnection alarms will send alarm signals. The wired interconnection alarms will go into interconnection alarm mode: BI - BI - pause 1.2s, with the red LED flashes, this alarm pattern is repeated.
Low battery modewhen the battery voltage is low than threshold, the red LED will flash once every 40 seconds with a sound of "chrip".
Fault modeIf the alarm detection signal decays below threshold, the alarm chirp occurs without LED flashes every 32 seconds.
Silence modePress the test button at least 2 seconds, it will go into silence mode for approx 8 minutes. That will desensitize the alarm sensitivity temporarily. At this time, the red LED will flash once every 8 seconds.
No disturb modeWhen the alarm device is in low battery mode,in order to avoid disturbing you at night, please press the test button for 3 seconds which will mute this warning tone for about 14 hours. After 14 hours, the warning tone will still go off. The red LED will flash once every 40 seconds during No disturb mode.
 Test modeTest the unit to ensure proper operation by pressing the test button. At this time, the red LED will flash once per second with pulsating alarm until test button is released.

Company & FactoryJbe BS5446 RF Module Dual Power Supply Hardwired Heat Alarm
Jbe BS5446 RF Module Dual Power Supply Hardwired Heat Alarm


Why choose JBE?
1.JBE has strong scientific research strength, perfect production testing equipment, and has the world's most advanced German LORENZ smoke case, British AWT smoke testing case and other top research and development, testing equipment.
2.JBE has China's first-class fire research and technology team, and has an engineer team with 8 rich experience engineers who have been engaged in alarm development for more than 5 years.
3.Owned the most authoritative certificates such as ISO, BSI, EN14604:2005/AC: 2008, CCC, CE, etc.
4.More and more customers worldwide are using our products, we received good feedback and reviews from lots of customers. We are looking for good customers like you!

Product Details:Jbe BS5446 RF Module Dual Power Supply Hardwired Heat Alarm
Jbe BS5446 RF Module Dual Power Supply Hardwired Heat Alarm


Application:Jbe BS5446 RF Module Dual Power Supply Hardwired Heat Alarm

Production precess & Certificates:Jbe BS5446 RF Module Dual Power Supply Hardwired Heat Alarm

Logistics & Packing:Jbe BS5446 RF Module Dual Power Supply Hardwired Heat Alarm


FAQ:
Q1:Are you manufacturer?
A: Yes.
 
Q2:Can I have a sample order?
A:Yes,we welcome sample order to test and check quality.
 
Q3:Do you offer OEM service?
A:Yes, we can design the things according to your request.
 
Q4: What's the MOQ?
A: About 1000pcs.
 
Q5:How long is your delivery time?
A: It depends on your order, usually it will be about 7-30days.

You Might Also Like