Products

Coal Washing Dewatering Sieve Screen for Coal Slurry

China Coal Washing Dewatering Sieve Screen for Coal Slurry, Find details about China Dewatering Screen, Dewatering Sieve from Coal Washing Dewatering Sieve Screen for Coal Slurry

Shaft Number
Single
Running Track
Linear Vibrating Screen
Supporting Device
Rubber Spring
Warranty
1 Year
Customized
Customized
Condition
New
Mining Object
Coal Machinery
Screening Area
6.3~13m2
Frequency
800rpm
Amplitude
Double Amplitude:9~11mm
Capacity
30~120t/H
Trademark
PK
Transport Package
Standard Sea Freight Packing
Specification
ISO
Origin
China
HS Code
84741000
Shaft Number
Single
Running Track
Linear Vibrating Screen
Supporting Device
Rubber Spring
Warranty
1 Year
Customized
Customized
Condition
New
Mining Object
Coal Machinery
Screening Area
6.3~13m2
Frequency
800rpm
Amplitude
Double Amplitude:9~11mm
Capacity
30~120t/H
Trademark
PK
Transport Package
Standard Sea Freight Packing
Specification
ISO
Origin
China
HS Code
84741000
Coal Washing Dewatering Sieve Screen for Coal Slurry

Introduction
Dewatering screen have a wide variety of application including dewatering, desliming, degritting, rinsing, scrubbing and washing. It is made up of screen cloth, vibration exciter, supporting system and motor. Materials such as sand, gravel, crushed aggregates, frac sand, industrial sands, mineral sands, hard rock, precious metals, coal, iron ore, salt and other granular materials which can be processed by dewatering screens.

Working Principle and Application
To dewater material effectively, damp material is feed onto a steep, downward inclined screen surface at the feed end of the dewatering Screen to achieve rapid drainage. A pool of water begins to form in the valley as material builds up on the slightly upward inclined surface. Counter rotating motors create a linear motion, driving solids uphill, while liquid drains through the screen media. The uphill slope of the screen, along with a discharge weir, creates a deep bed that acts as a filter medium, allowing retention of material much finer than the screen openings.
When the two vibrating motor that installed vertically on the dewatering screen rotate relatively, the eccentric block of two vibrating motors produce rated excitation force. The horizontal excitation force will cancel each other out, the vertical excitation force is transported to the whole screen surface through the body mass vibration.
Dewatering screen is widely used in coal industry, ore industry, electricity industry metallurgy industry, mining industry etc.

Advantages and Features
1. Low noise, easy maintenance
2. Stable structure with strong exciting force
3. High screening efficiency and low noise pollution
4. Light weight, easy to disassemble and replace
5. Stable structure and strong exciting force

Technical data:
ModelScreen area
(m2)		Mesh Size
(mm)		Feeding Size 
(mm)		FrequencyAmplitude
(mm)		MotorPower
(kW)		Capacity 
(t/h)
ZSM154260.25-13≤3008009-10Y160M-41130-60
ZSM1556813-50≤30080010Y160L-41530-60
2ZSM15568U:13-50
  L:0.25-13		≤30080011Y160L-41530-60
ZSM1556B813-50≤30080011Y132M-47.5×230-60
2ZSM1556B8U: 13-50 
L:0.25-13		≤30080011Y132M-47.5×230-60
ZSM1756A9.513-50≤30080010Y160L-41550-80
2ZSM17569.5U:13-50 
L:0.25-13		≤30080010Y160L-41550-80
ZSM1756B9.513-50≤30080010Y132M-47.5×250-80
2ZSM1756B9.5U:13-50 
L:0.25-13		≤30080010Y132M-47.5×250-80
ZSM18561013-50≤30080011Y160M-41150-80
ZSM20651313-50≤30080011Y180M-418.570-100
2ZSM206513U:13-50 
L:0.25-13		≤3008001Y180M-418.570-100
ZSM2065B1313-50≤3008009Y160L-411×270-100
2ZSM2065B13U:13-50 
L:0.25-13		≤30080011Y160L-411×270-100


Selection Conditions
♦Material to be processed: _____♦Max. granule size of the feeding material: _____mm
♦Handling capacity (Ps. It means the total♦Layer number: ______
material capacity feeding from the inlet): _____t/h♦Mesh size of each layer: _____mm
♦Bulk Density: _____t/m3♦Particle distribution percentage:____________
♦Material temperature: _____ºC;(please check the following example to help you 
♦water content:____%understand it.Supposing the layer number is 2 
♦Material is corrosive or not: ____ (Ps. Yes or No)and the aperture size of each layer is 10mm and 5mm,
♦Material is sticky or not: ____ (Ps. Yes or No)then you will get 3 kinds of products: X,Y and Z.
♦Working environment is indoor or outdoor: _____ X≥10mm; 5mm≤ Y < 10mm; Z<5mm.
♦Working environment temperature: ______ ºCWe want to confirm the following information:
♦Upstream equipment (Ps. It means what kind of1)The percentage of X in the whole material:_____%;
equipment is used to feed the material): _____2)The percentage of Y in the whole material:_____%;
♦Downstream equipment (Ps. It means what kind of3)The percentage of Z in the whole material:_____%;)
equipment is used to discharge the material): _____♦Working power supply: _____V ______HZ 

 

You Might Also Like