ISO Simulation Environmental Ozone Resistance Aging Testing Test Chamber
China ISO Simulation Environmental Ozone Resistance Aging Testing Test Chamber, Find details about China Ozone Aging Test Machine, Good Performance Ozone from ISO Simulation Environmental Ozone Resistance Aging Testing Test Chamber
Basic Info.
Model NO.
GAG-E208
Trademark
Gaoge
Specification
Inner box size: 500x600x500 mm(WxHxD)
Origin
China
HS Code
9013809000
Model NO.
GAG-E208
Trademark
Gaoge
Specification
Inner box size: 500x600x500 mm(WxHxD)
Origin
China
HS Code
9013809000
Product Desciption
1.Standards compliant
| GB/T 7762 | Vulcanized rubber ozone aging test static tensile test method |
| GB/T 13642 | Vulcanized rubber resistance to ozone aging test dynamic tensile test method |
| ISO 1431/2 | Vulcanized rubber - ozone cracking - Part 2: Dynamic strain test |
2.Product introduction
The ozone aging test chamber is mainly suitable for the ozone aging resistance test of polymer materials and their products.
The content of ozone in the atmosphere is very small, but it is the main factor for the aging of polymer materials and their products. The ozone aging box simulates and strengthens the atmosphere.
Ozone conditions, in a short time to obtain experimental results similar to actual use or reproduction, study the action of ozone on polymer materials and their products (rubber), quickly identify and evaluate the anti-ozone aging performance of rubber and anti-ozonant protection The method of effectiveness, and then take effective anti-aging measures to improve the service life of rubber products.
3.Product Features
Ozone is rarely contained in the atmosphere, but it is a factor of rubber aging. There are two standards for ozone aging test methods, one is static strain test method and the other is dynamic strain test method. The ozone aging tank generally consists of three parts, namely: ozone generation system, sample aging chamber and ozone determination and control system.
Ozone generator system. It mainly includes components such as ozone generators, air purification devices, heat exchangers and airflow control systems. The ozone generator uses a high pressure silent discharge tube. A high-pressure silent discharge tube can obtain a higher concentration of ozone.
When using a silent discharge tube, in order to avoid the formation of nitrogen oxides that have an influence on the test, purification is first required. The ozonated air needs to be exchanged for heat before it can be fed into the sample aging chamber. The sample aging chamber. The chamber is enclosed and unlit (except for intermittent lighting). A window is visible on the door to observe the surface of the sample.
The outer casing of the test box is made of cold-rolled steel plate with electrostatic spray, which is beautiful in appearance; the inner wall of the box, the pipe, the sample fixture and the structural material should be made of stainless steel or anti-corrosion inert material which is not easy to decompose ozone.
In addition, the device is also equipped with a timing device. The intelligent digital display controller used in the ozone concentration measurement and regulation device can directly set the ozone concentration value and implement PID self-adjustment control with high control precision and simple and convenient operation.
Ozone aging tanks are available for static strain testing, as well as for dynamic testing, and both are available. However, its requirements must comply with the relevant provisions of national standards or international standards.
4.The main technical parameters
| Inner box size | 500×600×500mm(W×H×D) |
| Carton size | 950×1500×1150mm (W×H×D) |
| Inner box material | 304 Stainless steel plate |
| Outer box material | 304 stainless steel shell or cold rolled steel plate spray |
| Temperature range | RT+10°C~65°C |
| Humidity range | RT-65% |
| Ozone concentration | 50 ~ 500pphm |
| Ozone control accuracy | ±10% |
| Vulcanized rubber test nominal concentration | 50 ± 5ppm |
| Temperature fluctuation | ±0.5 °C (at no load) |
| Temperature uniformity | ± 2 ° C (at no load) |
| Sample rack speed | 360 degree rotating sample holder (speed 1 revolutions per minute) |
| Gas flow rate | 12 ~ 16min / s |
| Ambient temperature | normal temperature +10 ° C |
| Stretching speed | 5HZ (±1HZ) |
| Stretching distance | 5 ~ 100mm |
5.Control System
| Controller | color LCD touch screen controller TEMI880 |
| Time unit | 9999 points |
| Ozone concentration analysis | 4-20 mA output of the inlet concentration analyzer |
| Ozone generator | high pressure silent discharge tube |
| Acquisition system | Imported German Siemens plc programmable process controller measurement module |
| Humidification system | external isolation, all stainless steel boiler type shallow surface evaporative humidifier (optional) |
| Dehumidification system | using evaporator coil dehumidification |
| Water supply system | humidification water supply adopts automatic control, and can recover residual water, save water and reduce consumption |
| Heating system | completely independent system, nickel-chromium alloy electric heating water heater |
6.Features
6.1 Can be widely used in:
(1) Accelerated aging research
(2) Quality management and quality assurance testing
(3) Determination of ozone (OZ) tolerance of rubber and polymer materials in laboratory development and formulation testing.
The wide concentration setting range can meet the different needs of customers.
With a sophisticated ozone monitoring system, the concentration of ozone can be accurately controlled and measured.
Equipped with static and dynamic test fixtures that meet international standards.
6.2 Good environmental control system:
(1) In the continuous cycle test, the ozone concentration can still reach equilibrium quickly
(2) The test slot has an automatic temperature hold function.
6.3 High efficiency and low cost:
(1) The test can be completed automatically after the test conditions of the simple operation are completed.
(2) The ozone of this instrument is physically produced without the need to purchase a separate chemical reagent
7.Corporate partners
8.Company Certification
9.Company profile
10.Service Process:
| Free Pre-Sales Consulting GAOGE-TECH offer 12 hours quick pre-sales response and free consulting. Any kind of technical support is available for users. We offer progressing solution design to all the users. |
| 20 Days Quick Delivery We have mass production and stock & ready item, for these items, we offer 20 days quick delivery time. For big machine and special requirement, we will trade you as the priority customer and to produce your cargo for the first time. |
| 1 Year Quality Guarantee GAOGE-TECH 1-year guarantee for our machine. And to become you are our long-term customer, we will prolong the quality guarantee period especially for you. |
| 12 hours Quick Feedback & After-Sales Service We will offer "Training Video", "Instruction Book", "Operation Manual" to you, which is easy to learn and operate. We will supply brochures for simple trouble-shootings of the machine, which will help you deal with the common problems happened to the machine. We will offer plenty of technical support online, just like detailed technical and installation instructions. For example, when you meet a maintenance problem, we will make a video with completed and detailed operation process according to the problem, it just seems that I am on the spot by your side to instruct you how to deal with the problem. |
| Quick Back-up Parts Available & Technical Assistance Our extensive inventory of spare parts means replacements get shipped to you as quickly as possible. Immediate technical assistance is only an email or phone call away. |
| Free Training Service We insist that our customers receive personal, hands-on training with every machine we sell. This training is free, and we will work with you for as long as it takes to ensure you feel comfortable operating your machine. We pride ourselves on our expertise and our ability to educate our customers in the installation, proper maintenance, and most efficient use of GAOGE-TECH machines. |
| Special Designing, Customized, OEM Order is accepted GAOGE-TECH is rather willing to help you to realize your special testing and requirement by our innovative ability. So please do not hesitate to contact us when you need special design or customized machine and OEM machines. |
11.Packaging & Shipping
1.Inside is covered with plastic film before we put them into the plywood, which has good transparency, impact resistance, tasteless and prevent moisture corrosion.
2.Outside is strong plywood and accord with export standards.
3.We can ship testing equipment according to customer request.
You Might Also Like
S6-150 Gearbox Spare Parts Synchronizer Ring 1297 304 484 fo......
Dongfeng Mini 4cbm 5cbm Vacuum Sewage Truck
Luxury Custom Cardboard Paper Clothing Packaging Box
Automatic Sectional Garage Door Motor
Pure Tungsten Target for Sputtering Coating/Chamfer 45 Degre......
NiCd AA 700mAh 7.2V 9.6V Rechargeable Battery Pack with Plug
290mm Night Use Belted Ultra Thin Feminine Hygiene Pad
2/5/10m USB LED String Lights Bulb Outdoor Waterproof Garlan......
5ml Cylinder Essential Oil Glass Vial with Rubber Dropper
Prepianted Color Coated Aluminum Strip Coil for Transformer
RF Coaxial Connector Qma Female Solder for Rg405 Cable
Nal -800g5 Automatic Plastic Material Vacuum Auto Loader