Products

PT-D93- 261A Automatic Pensky-Martens Closed-Cup Flash Point Tester ASTM D93

China PT-D93-261A Automatic Pensky-Martens Closed-Cup Flash Point Tester ASTM D93, Find details about China Petroleum Tester, Automatic Flash Point Tester from PT-D93-261A Automatic Pensky-Martens Closed-Cup Flash Point Tester ASTM D93

Model NO.
PT-D93-261A
Ambient Temperature
≤ 40ºC
Trademark
Xiangyi
Transport Package
Plywood Packing
Specification
Overall dimension: 410mm× 360mm× 310mm
Origin
China
Model NO.
PT-D93-261A
Ambient Temperature
≤ 40ºC
Trademark
Xiangyi
Transport Package
Plywood Packing
Specification
Overall dimension: 410mm× 360mm× 310mm
Origin
China
Summary
This instrument is designed and manufactured as per standards GB/T 261-2008 Determination of Flash Point - Pensky-Martens closed cup method and ASTM D93 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester. It is used to make determination of the closed cup flash point of the petroleum products.
 
I. Main technical features
1. Simulation tracking displays function curves of heating up and test time.
2. Equipped with the English prompt function of mis-operation.
3. Equipped with prompt function of test date,test time and other parameters.
4. Automatically calibrate the effect of atmospheric pressure to test and calculate the corrected value.
5. Differential coefficient detection.Automatically correct the system deviation.
6. Automatically open the lid,detect the flash point and print test data.
7. The test arm rises up and lowers down automatically.
8. Igniting with electric igniting gun,forced air cooling.
 
II. Main technical specifications
1. Power supply: AC(220±10%)V,  50Hz.
2. Flash point determination:Range: Ambient to 300ºC.
                         Repeatability: ≤ 2ºC
                         Reproducibility: ≤ 4ºC
                         Accuracy: 0.1ºC
3. Heating rate: Procedure A: (5~6)ºC/min
               Procedure B:(1~1.6)ºC/min
               Automatic control and manually adjustable.
4. Stirring rate:Procedure A: (90~120)RPM, Procedure B: (250±10)RPM
              Automatic control and manually adjustable.
5. Igniting mode: (1) Igniting source: gas(or other civilian fuels,the same below)
                (2) Electric ignition. Gas flame diameter:3.2mm~4.8mm
6. Ambient temperature: ≤ 40ºC
7. Relative humidity: ≤ 80%
8. Maximum power consumption: 500W

 III. Standard accessories
No.ItemUnitQty
1Oil CupPiece1
2Power supply wire(250V 6A)Piece1
3Printer paperRoll1
4Burning torchPiece1


PT-D93-261A Automatic Pensky-Martens Closed-Cup Flash Point Tester ASTM D93Other related products:


 

 


 







 

You Might Also Like