Products

Polymer Melt Pump for Plastic Extrusion Line Monofilament Extrusion Line

China Polymer Melt Pump for Plastic Extrusion Line Monofilament Extrusion Line, Find details about China Metering Pump, Gear Pump from Polymer Melt Pump for Plastic Extrusion Line Monofilament Extrusion Line

Model NO.
GM-ME series
Structure
Gear Pump
Usage
Extrusion
Fuel
Electricity
Application
Metering
Trademark
Gmach
Transport Package
Seaworthy Packaging
Specification
SGS
Origin
Zhengzhou
HS Code
8421299090
Model NO.
GM-ME series
Structure
Gear Pump
Usage
Extrusion
Fuel
Electricity
Application
Metering
Trademark
Gmach
Transport Package
Seaworthy Packaging
Specification
SGS
Origin
Zhengzhou
HS Code
8421299090
Polymer Melt Pump for Plastic Extrusion Line monofilament extrusion line 


Melt pumps come in a variety of types and sizes to fit the needs of your extrusion, compounding or film blowing , sheet , cast film , pipe and  other polymer production process.

Benifits of the metering pump melt gear pump
1. Stabilizing the output pressure---the pressure on extruder can be reduced by 30%-50% after using melt pumps.
2. improving the product quality
3. increasing the extrusion output---reducing pressure on screw and chaning the building pressure from "screw to die" to "melt pump to die", so the screw can extrude the products with high efficiency. Mean while the back-pressure on the extruder can be adjusted, reducing the melt residence in screw cylinder, stabilizing the plasticizing process and improving the product's quality and quantity.
4. prolonging the working life---the pressure of extruder screw can be lowered after using the melt pumps, so screw wear can be reduced consumable

Melt gear pump we produced 
Polymer Melt Pump for Plastic Extrusion Line Monofilament Extrusion Line
Polymer Melt Pump for Plastic Extrusion Line Monofilament Extrusion Line
Polymer Melt Pump for Plastic Extrusion Line Monofilament Extrusion Line



Technica data
1.Rotate speed: ≤60rpm(Adjustable)
2.Temperature: 400°C (max.) 
3.Max.Outlet pressure: 350Bar
4.Max.Differential pressure: 275Bar 
5.Heating method: Stainless Steel Cartridge Heater
6.Fastening parts:  12.9 high-strength screws
7.Voltage: 380V(Others are optional)
8.Frequency: 50Hz(Others are optional)

Technical parameter 
Type Volume
(cc/r)		Max rotary
Speed
(r/min)		Outlet pressure
(MPa)		Inlet pressure
(MPa)		Flow rate      L/hTemperature
 
Low viscosity
1-1000Pa·s		High viscosity 1000~8000Pa·s 
Ultra-high
Viscosity
≥8000Pa·s
GM-ME-55.0100≤350~30≤20≤12≤8≤350ºC
GM-ME-7.57.5100≤350~30≤20≤18≤10
GM-ME-1010100≤350~30≤20≤25≤15
GM-ME-202090≤350~30≤80≤40≤24
GM-ME-31.531.590≤350~30≤150≤80≤42
GM-ME-505080≤350~30≤220≤120≤70
GM-ME-757580≤350~30≤280≤180≤90
GM-ME-10010080≤350~30≤350≤230≤120
GM-ME-16016080≤350~30≤550≤350≤175
GM-ME-20020080≤350~30≤700≤450≤250
GM-ME-25025080≤350~30≤800≤600≤300
GM-ME-35535580≤350~30≤1000≤750≤350
GM-ME-50050060≤350~30≤1500≤1000≤500
GM-ME-75075060≤350~30≤1850≤1500≤750
GM-ME-1000100060≤350~30≤3000≤2000≤1000
GM-ME-1600160050≤350~30≤4000≤3000≤1500
GM-ME-2500250050≤350~30≤6000≤4500≤2200
GM-ME-3150315050≤350~30≤7000≤5200≤2600
GM-ME-4000400040≤350~30≤8000≤6000≤3000
Remark:the melt gear pump flow is associated with the work speed, material viscosity, pressure,
So the model selection please ask for us.

Application fields

Polymer Melt(film, pipe, plate, sheet, granulation )
High Temperature or High Viscosity Materials (PC, PMMA, ABS, HIPS, PET, PVB, PS, PP, PA, PE, PVA)
Chemical Fiber Melt (polyester for cotton-fiber, polypropylene )
Other Polymer Melt Materials (rubber, asphalt, paint, adhesives, coatings, lubricants)

Polymer Melt Pump for Plastic Extrusion Line Monofilament Extrusion Line
Polymer Melt Pump for Plastic Extrusion Line Monofilament Extrusion Line

 

You Might Also Like