Products

Carbon Steel Plastic PFA PTFE Lined Pipe Fitting

China Carbon Steel Plastic PFA PTFE Lined Pipe Fitting, Find details about China Pipe Fitting, PTFE Lined Pipe Fitting from Carbon Steel Plastic PFA PTFE Lined Pipe Fitting

Model NO.
PTFE lined
Technics
Hot-pressed
Color
Green
Standard
ASME B16.9
Thickness
Sch5 to Sch160
Product Name
Equal Teebutt Weld Pipe Fittings A403 Wp316 Sch10s
Trademark
Fly
Transport Package
Plywooden Case
Specification
1/2" - 48"
Origin
Zhejiang Province, China
HS Code
7307230000
Model NO.
PTFE lined
Technics
Hot-pressed
Color
Green
Standard
ASME B16.9
Thickness
Sch5 to Sch160
Product Name
Equal Teebutt Weld Pipe Fittings A403 Wp316 Sch10s
Trademark
Fly
Transport Package
Plywooden Case
Specification
1/2" - 48"
Origin
Zhejiang Province, China
HS Code
7307230000

PTFE Lined Pipe Fitting

Carbon Steel Plastic PFA PTFE Lined Pipe Fitting

Specification of Lined Pipes and Fittings

 
1. Range
1.1This specification is applicable for PTFE lined pipes and fittings used for transmitting corrosive fluid. The content includes construction materials, size and test procedure of standards.
1.2The content includes national standard 10KG level, ANSI150LBS and JIS10K specification etc.
 
2. Material Structure
2.1PTFE properties
2.1.1Temperature limitation
Continuous operating temperature 260ºC
Melting point 327ºC
2.1.2Chemical resistance Resist most of chemicals. For detail information, please consult our sales engineer.
2.1.3Frictional coefficient
Static friction coefficient 0.10
Dynamic friction coefficient 0.05
2.1.4Proportion ASTM D792 2.14 ~ 2.2
2.1.5Tensile strength ASTM D638 280 ~ 350Kg/cm²
2.1.6Anti-adhesive
Surface tension 18.5dyne/cm
Contact angle
Water 104°~ 111°
Hexadecane 37°~ 45°
2.1.7Elongation ASTM D638 100-300%
2.1.8Water absorption ASTM D570 <0.01%
  
2.2PTFE liner
2.2.1Sizes of this type of PTFE lined pipes, flanges and fittings are from 1/2″ to 12″
  
2.3Iron parts
2.3.1Pipes and fittings
 Pipes and fittings are made of welded or seamless steel pipes of iron parts. And the thickness is decided by international standards and customers' requirements.
2.3.2Flange
 Flanges are made according to any specification of international standard or ANSI150LBS or JIS10K.
 
3. Design Requirements
3.1Size
3.1.1Standard thickness of PTFE lined pipes Unit: mm
 
Size1″1-1/2″2″3″4″6″8″10″12″
Standard pipe3.03.03.03.03.54.54.55.05.0
Thickness4.04.04.05.05.56.58.59.010.0
 Note: for thickness of other PTFE lined pipes different from above and PFA lined pipes below 4″, please refer to our sales engineer.
3.1.2Thickness of PTFE lined pipes
 
Size1/2″~ 4″Thickness of liner3mm
 6″~ 8″ 4mm
 10″~ 12″ 5mm
3.1.3Specification of size of lined flaring Unit: mm
 
Fitting Size15202540506580100150200250300
1/2″3/4″1″1-1/2″2″2-1/2″3″4″68″10″12″
Flaring Diameter3240486887100117151203256311365
  
3.2Vent holes
 Every pipe or fitting is equipped with vent holes to release gas between liners and iron parts. Each pipe shall at least have two vent holes of 0.12″(3mm) in diameter, located at flange faces of two ends, 2″(50mm) ; each fitting shall also at least have two vent holes; and reducing flange does not have any vent hole.
 
4. Detection requirements
4.1Hydraulic test Interior
 pressure test will be operated at 150% of maximum work pressure. Total pressure can be reached within one minute and kept for 3 minutes.
  
4.2Pinhole test
 The test shall be performed with high voltage equipment (10,000 V) that shall not be destructive. After the current is connected, if any spark is produced from the probe or any pinhole warming sound is made by the detector, it means there is defect in the liner and thereby this part shall not pass quality inspection.
  
4.3Visual inspection and appearance paint brush
 The surface shall not have any bubble, pinhole or other defects. All defects shall be fixed before shipment. After visual inspection, an epoxy resin base coat shall be coated outside the pipes and fittings.
 
5. Storage, transportation and confirmation
Use wooden plate to protect lining face of flanges at each end. Therefore products will not be damaged during normal transportation. 6. Pipe fittings A value specification
 
6. Pipe fittings A value specification
 
NameSpecificationA value of 90
degrees elbow		A value of 45 degrees elbowA value of three-wayA value of four-wayA value of reducing joint
PTFE pipeDN1070457070 
PTFE pipeDN1580568080 
PTFE pipeDN2085608585 
PTFE pipeDN2590629090 
PTFE pipeDN3210064100100 
PTFE pipeDN4011564115115 
PTFE pipeDN5012068120120100
PTFE pipeDN6513072130130100
PTFE pipeDN8014078140140100
PTFE pipeDN10015098150150100
PTFE pipeDN125180108180180150
PTFE pipeDN150195118195195150
PTFE pipeDN200220158200200200
PTFE pipeDN250257195235235250
PTFE pipeDN300285226260260300

Hot Tags: lined pipes and fittings, PTFE lined pipes and fittings, Teflon lined pipes and fittings


Carbon Steel Plastic PFA PTFE Lined Pipe Fitting

Carbon Steel Plastic PFA PTFE Lined Pipe Fitting
Carbon Steel Plastic PFA PTFE Lined Pipe Fitting
Carbon Steel Plastic PFA PTFE Lined Pipe Fitting
 

You Might Also Like