Hot Melt Adhesive High Speed Laminating Machine with Servo Drive

China Hot Melt Adhesive High Speed Laminating Machine with Servo Drive, Find details about China Laminating Machine, Machine from Hot Melt Adhesive High Speed Laminating Machine with Servo Drive

Basic Info.

Model NO.

ZHHY-001

Performance

Anticorrosive

Oversize

18m*6.3m*3.4m

Power

150kw-350kw

Voltage

380V

Model

Zhhy-001

Speed

0-60m/Min

Delivery Time

60-90days

Heating Model

Elcetric Heating

Coating

Single-Side/Double-Side

Water Tank

Water Tank/Caustic Tank/Acid Tank/No Tank

Embossing

Single-Sided /Embossing

Trademark

Yiyue

Transport Package

Standard Exporting Packing

Specification

1 Set

Origin

China

HS Code

8501330000

Model NO.

ZHHY-001

Performance

Anticorrosive

Oversize

18m*6.3m*3.4m

Power

150kw-350kw

Voltage

380V

Model

Zhhy-001

Speed

0-60m/Min

Delivery Time

60-90days

Heating Model

Elcetric Heating

Coating

Single-Side/Double-Side

Water Tank

Water Tank/Caustic Tank/Acid Tank/No Tank

Embossing

Single-Sided /Embossing

Trademark

Yiyue

Transport Package

Standard Exporting Packing

Specification

1 Set

Origin

China

HS Code

8501330000

Product Desciption

Laminating machine can be divided into two categories, namely, coating type laminating machine and precoating type laminating machine. It is a special equipment for paper and film. That is to say, the coating machine includes three parts: gluing, drying and hot pressing. It is widely used in China because of its wide application range, stable and reliable processing performance. Pre coated laminating machine, without glue and dry parts, is small in size, low in cost and flexible in operation. It is not only suitable for laminating processing of large quantities of printed matter, but also suitable for laminating processing of small batches and scattered printed matter such as automatic desktop office system. It has a bright future.

This machine laminating of our factory is a one-time molding, and the consumables used have been coated with glue. When laminating, the glue is melted by heating, and then the film is glued on the printed matter by pressurizing. This kind of coating equipment is cheap, easy to operate and does not produce harmful gases during operation, which is a trend of the development of coating.
Hot Melt Adhesive High Speed Laminating Machine with Servo Drive

Model	ZHHY-001
Basic Material Thickness	0.18-0.5mm
Specification	L18-20mW6.3mH3.4m
Input Power	380V-250KW-150KW
Vehicle Speed	0-60m/min
Equipment table size	≤1300mm(Coil Width:500-1150mm)
Vertical Laminating	Holt Melt Laminating Machine
	Lamination Machine
	Laminator
Product Process
Adopt plastic film (PET,PVC,PVDF,ASA) combined with metal plate through hot melting , which has solved the corrosivity of metal plate and metal container , both has the decorating , barrier of plastic film and the malleability ,figurability of metal sheet. Metal plate : galvanized sheet , stainless steel sheet , cold rolled sheet , aluminum sheet. Plastic Film: PET,PVC,PVCF,ASA etc. Film Color: RAL color/Pantone color; wood grain , marble grain , brick grain , stone grain , flower pattern , brushed , embossed.