China 50W Triple Output Power Supply AC/DC SMPS, 5V 12 24V 48V, LED Switching Power Supply, Find details about China Power Supply, Switching Power Supply from 50W Triple Output Power Supply AC/DC SMPS, 5V 12 24V 48V, LED Switching Power Supply
1. AC input 90~132VAC / 180~264VAC
2. Protections: Short circuit / Overload / Over voltage / Over temperature
3. 100% full load burn-in test
4. Low cost, high reliability
5. 12 months warranty
Specifications:
50w triple output power supply ac/dc smps
Model | T-50A | T-50B | T-50C
| T-50D | ||||||||
CH1 | CH2 | CH3 | CH1 | CH2
| CH3 | CH1 | CH2 | CH3 | CH1 | CH2 | CH3 | |
DC output voltage | 5V | 12V | -5V | 5V | 12V | -12V | 5V | 15V | -15V | 5V | 12V | 24V |
Output voltage range(Note:2) | ±2% | ±5% | ±5% | ±2% | ±5% | ±5% | ±2% | ±5% | ±5% | ±2% | ±6% | ±6% |
Rated output current | 7A | 1A | 1A | 5A | 1A | 1A | 4A | 1A | 1A | 3A | 1A | 1A |
Output current range | 0.6-7A | 0.2-1A | 0.2-1A | 0.6-5A | 0.2-1A | 0.2-1A | 0.6-1A | 0.2-1A | 0.2-1A | 0.6-4A | 0.2-1.2A | 0.2-1.2A |
Wave and noise(Note:3) | 100mV | 100mV | 100mV | 100mV | 100mV | 100mV | 100mV | 100mV | 100mV | 50mV | 120mV | 120mV |
Inlet stability(Note:4) | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±1% | ±1% |
Load stability(Note:5) | ±1% | ±4% | ±4% | ±1% | ±4% | ±4% | ±1% | ±4% | ±4% | ±1% | ±5% | ±5% |
DC output power | 52W | 49W | 50W | 51W | ||||||||
Efficiency | 66% | 69% | 71%
| 72% | ||||||||
Adjustable range for DC voltage | CH1; +10, -5% | CH1; +10, -5% | CH1; +10, -5% | CH1; +10, -5% | ||||||||
Input current | 1.6A/115V 0.8A/230V
| |||||||||||
AC inrush current | Cold-start current 20A/115V 40A/230V | |||||||||||
Leakage current | <0.5mA/240VAC | |||||||||||
Overload protection | 105%~150% Type: pulsing hiccup shutdown Reset: auto recovery | |||||||||||
Temperature coefficient | ±0.03%/°c(0~50°c)ON+5V | |||||||||||
Setup, rise , hold up time | 200ms, 50ms, 16ms | |||||||||||
Vibration | 10~500Hz, 2G 10min,/1cycle, Period for 60min, Each axes
| |||||||||||
Withstand voltage | Input and output internal: Input and encolsur: 1.5KvAC, Output and enclosure: 0.5KvAC | |||||||||||
Isolation resistance | Input and output internal: Input and enclosure, Output and enclosure:500VDC/100MΩ | |||||||||||
Working temperature and humidity | -10°c~+60°c(Refer to output derating curve), 20%~90%RH | |||||||||||
Overall dimension | 159×98×38mm | |||||||||||
Weight | 0.55Kgs
| |||||||||||
Safety standards | Meet UL 1012 requirement (Not apply for the mark) |