Summary 

The RTC70.XX is used for 2-position control with on/off output for the control the temperature by means of an NTC sensor placed externally or internally in the thermostat 
The thermostat acquires the room temperature with its built-in sensor or floor sensor, and the heating contact will close when the room temperature falls below the selected setpoint. 

Application 

For the control of warm-water (floor) heating systems and direct electric heating systems used in Commercial buildings, Residential buildings, Light industrial buildings… 

Features 

LED indicator is light when heating is on 
With manual switch and knob for easy operation 
On/off control output for heating device  
Setback function when connecting with a programmable timer (RTC70.33&RTC70.36) 
Temperature limitation function for protecting the floor (RTC70.33&RTC70.36) 

Technical Parameters 

Voltage: AC230V (AC110V / AC24V available) 
Power consumption: 5W 
Setting range: 4ºC~45ºC  
Limitation scale: 25ºC~50ºC (RTC70.33&RTC70.36) 
Setback temperature: 5ºC (RTC70.33&RTC70.36) 
Switching differential: ±0.5K 
Ambient temperature: -5ºC~50ºC 
Protective housing: IP20 
Housing material: self-extinguishing PC 
Floor sensor: rubber-thermoplastic NTC sensor,  
cable length is 3m 

Selection table