Through adopting the continuous transmission and heating teachniques,LPG is able to reduce the friction between the surface of the glass and the surface of the ceramic rollers so that it can improve

the heating uniformity.The use of lower temperature entry for the furnace avoids the breakage of the surface of the glass after the entry.The teachque of testing the state of galsses'exit ensures the

safety of the glasses'exit of the furnace. The emergency inside the flat quenching can be dealt in time because of the fast opening and closing system for it.

Products range is not fully listed here.

For further information, please contact with TIMBERY group.

Application:

Note: All the size are based on millimeter and production are calculated by 5mm float glass at 80% loading rate and 100% finishing rate. The change of equipment configuration will be in accordance with the difference of glass thickness range and environmental factors, it is depend on actual situation.
 

Functional Description:

1,All driving systems are round belt construction, Synchronization is more steady and realiable.

2, Cooling section is composed of module parts, each part can be randomly adjusted: height, left&right location. Then it is more easy to make glass flatness better.

3, The blowing angle has been upgraded, the glass surface is very neat and clear.

4, Cooling section up down is controlled by lever lifting, this design could improve lifting precision.

5, Automatic height adjustment, to make sure the cooling section height precision.

6, UPS: If the power is suddenly off, heating chamber could expel the glasses and ensure the ceramic rollers are not dmaged.

7, Long-range control service, malfunction examination and solution.

Products range is not fully listed here.

For further information, please contact with TIMBERY group.