MEB-500 High Quality PP PE Plastic Recycle Washing Line


Introduction
Detailed Photos of Recycling Machine for Your Reference:

Application: Used to recycling baled or loose HDPE/PE/PP bottles
Product size: <18mm or customized
Capacity: >500 KG Per Hour
Moisture content remain: <1%


Production Process

1. Label Removing - 2. Size Reduction - 3.1st Friction Washing -
4. Hot Washing - 5.2ND Friction Washing - 6. Density Separation & Washing
- 7. Moisture Reduction - 8. Product Collecting


Main Machines & Function

Label Remover
Δ Used to peeling the labels from plastic bottles by high speed blades
Δ Working without water
Δ Label separation rate >95% (for round bottle)

Crusher
Δ Used for size reduction of plastic bottles into flakes
Δ V-shape rotor design for high efficiency
Δ Capacity: 500-600kg/hr (screen mesh size: 18mm)

Friction Washer
Δ Used to scrubbing the flakes by high speed blades to remove dirt and water
Δ High speed (800rpm) for high efficiency

Hot Washing Tank
Δ Used to washing the flakes by hot water to remove glue and greasy dirt
Δ Feeding caustic soda/detergent to wash
Δ Heating by electricity or customized
Δ Tank outside with heating protecting layer made of rockwool
Δ Special design for PP/PE recycling

Sink-Float Tank
Δ Used to separating the sinkable contamination and cleaning the PP/PE flakes by rolling drums
Δ Sink-float tank designed with 5PCS automatic drums on top for flakes cleaning and conveying
Δ The side dirt lift screw conveyor is optional

Drying Machine
Δ Including vertical dewatering machine and hot air drying system
Δ Used to reducing moisture content remain from the flakes by high speed blades and hot air
Δ Dewatering machine spinning speed: 1200rpm
Δ Drying system heating by electricity
Δ Final moisture content remain <1%

Electric Control Cabinet
Δ With thermal relay to projecting the engin
Δ With overloaded alarm and protecting system
Δ With emergency shut off control


Optional Machine

Trommel Separator
Δ Used to loosening the bottles and screening out the dirt, sand, soil from bottles
Δ Installed before label separation unit

Zigzag Label & Dust Separator
Δ Used to sucking out the label flake remain and fine dust from finished product
Δ Installed before collecting silo