New Style Customized Toaster Centrifugal Induced Draft Fan Blower
China New Style Customized Toaster Centrifugal Induced Draft Fan Blower, Find details about China Centrifugal Blower for Factory, Factory Ventilation Equipment from New Style Customized Toaster Centrifugal Induced Draft Fan Blower
Basic Info.
Model NO.
G(Y)4-68/G(Y)4-73/Y5-47/Y5-48/Y6-25/Y6-30/Y6-41
Model NO.
G(Y)4-68/G(Y)4-73/Y5-47/Y5-48/Y6-25/Y6-30/Y6-41
Product Desciption
Furnace Drum (Induced) Fans
Model:
G(Y)4-68Type,G(Y)4-73Type,Y5-47Type, Y5-48Type,Y6-25Type,Y6-30Type,Y6-41Type, Y8-39Type,Y9-38Type
Conditions of use
The conveyed medium should be airing or other gas that is non-flammable and explosive,non-corrosive to steel materials,
and does not contain viscous substances.
The allowable medium temperature of the blower is -20~80ºC,the relative humidity are ≤90%,and the content of dust and hard
glumes does not exceed 150mg/m.
The temperature of the flue gas conveyed by the induced draft fan can be as high as 250ºC,and a dust removal device with a dust removal efficiency of not less than 85% must be installed in front of the fan to ensure that the hard particle content of the gas
entering the induced draft fan does not exceed 250mg/m3.
Outlet Angle
The rotation direction of the centrifugal fan has two directions, "forward" and "to reverse". The air outlet angle of the "forward" or "to reverse" rotary fan can be made 0°, 45°, 90°, 135°, 180°, 225 °, 270° and other common angles, you can check below to select an outlet angle that meets your demands.
Driving Method
A.The fan has no additional bearing support , and the impeller and the motor are directly driven ;
B.Fan impeller cantilevered to support , V-belt transmission with the pulley between two bearings ;
C.Fan impeller cantilevered to support , V-belt drive with the pulley outside the two bearings ;
D.Fan impeller cantilevered to support , coupling to drive ;
E.Fan impeller double-point supported , V-belt drive with the pulley outside the two bearings ;
F.Fan impeller double-point supported , coupling to drive .
You can check below to select an driving method that meets your demands.
IN-HOUSE MANUFACTURING
Impellers in fabricated steel construction
Fan shaft machining
Qualified welding procedures according to GB norms
Virtually no limit to the type of material
Application Cases
Our products are colorful and unique, and can design and manufacture various supporting and special-purpose fan products according to the actual needs of users, in order to provide users with the most perfect match.
Packing
All package are passing international exported standard.
More Design,More Choose
Foshan Rong Zhi Cheng Machinery Co.,Ltd
is professional in manufacturing iron remover (suitable for slurry/slip, powder, glaze material), micronizer, roller screen/sieve, belt balance over 19 years exported to India, Vietnam,Thailand etc.
We had precise perfect machining capacity and group of experienced engineers and technicians to ensure high quality machines and great after-sales service to costumers. Every machine is owing high reputation for customers and creating a well-known brand in ceramic industry filed.
"providing opportunities to made talent, working down to the earth and win great business future" is our company operation philosophy.
We are working in professional way to win your trust, and full of confidence to meet challenges!
FAQ
Q1: Are you manufacturer?
A:Yes.We are manufacturer of more than 20 years.
Q2: What kind of packing of your goods?
A: We usually provide wooden case packing for goods by sea and ply wood case packing f or goods by air/express delivery.Alsowe also use cartons packing with ply wood pallet for some products.
Q3: How long is the delivery time?
A: Generally it is 2-5 days if the goods are in stock. Or it is 15-20 days if the goods are not in stock, it is according to quantityBut for customized products, there will be different production cycles according to different needs
Q4: Can you ship the goods to my destination port or my address?
A:Yes. We can do EXW FOB CNF or CIF shipment term for you. And we can help you arrange the delivery.By air or by sea or by express delivery is ok.
If you have any other questions, please feel free to contact us.
Application
Furnace drum (induced) fans are widely used in 1-500/h industrial and civil boilers,hot blast furnaces,incinerators,drying furnaces,baking furnaces,aging furnaces,annealing furnaces,bread furnaces and ceramic kilns for blast combustion It is used to support combustion,convey high temperature flue gas,forced hot air circulation,and remove wet waste flue gas.
Furnace drum (induced) fans are widely used in 1-500/h industrial and civil boilers,hot blast furnaces,incinerators,drying furnaces,baking furnaces,aging furnaces,annealing furnaces,bread furnaces and ceramic kilns for blast combustion It is used to support combustion,convey high temperature flue gas,forced hot air circulation,and remove wet waste flue gas.
Model:
G(Y)4-68Type,G(Y)4-73Type,Y5-47Type, Y5-48Type,Y6-25Type,Y6-30Type,Y6-41Type, Y8-39Type,Y9-38Type
Conditions of use
The conveyed medium should be airing or other gas that is non-flammable and explosive,non-corrosive to steel materials,
and does not contain viscous substances.
The allowable medium temperature of the blower is -20~80ºC,the relative humidity are ≤90%,and the content of dust and hard
glumes does not exceed 150mg/m.
The temperature of the flue gas conveyed by the induced draft fan can be as high as 250ºC,and a dust removal device with a dust removal efficiency of not less than 85% must be installed in front of the fan to ensure that the hard particle content of the gas
entering the induced draft fan does not exceed 250mg/m3.
Outlet Angle
The rotation direction of the centrifugal fan has two directions, "forward" and "to reverse". The air outlet angle of the "forward" or "to reverse" rotary fan can be made 0°, 45°, 90°, 135°, 180°, 225 °, 270° and other common angles, you can check below to select an outlet angle that meets your demands.
Driving Method
A.The fan has no additional bearing support , and the impeller and the motor are directly driven ;
B.Fan impeller cantilevered to support , V-belt transmission with the pulley between two bearings ;
C.Fan impeller cantilevered to support , V-belt drive with the pulley outside the two bearings ;
D.Fan impeller cantilevered to support , coupling to drive ;
E.Fan impeller double-point supported , V-belt drive with the pulley outside the two bearings ;
F.Fan impeller double-point supported , coupling to drive .
You can check below to select an driving method that meets your demands.
IN-HOUSE MANUFACTURING
Impellers in fabricated steel construction
Fan shaft machining
Qualified welding procedures according to GB norms
Virtually no limit to the type of material
Application Cases
Our products are colorful and unique, and can design and manufacture various supporting and special-purpose fan products according to the actual needs of users, in order to provide users with the most perfect match.
Packing
All package are passing international exported standard.
More Design,More Choose
Foshan Rong Zhi Cheng Machinery Co.,Ltdis professional in manufacturing iron remover (suitable for slurry/slip, powder, glaze material), micronizer, roller screen/sieve, belt balance over 19 years exported to India, Vietnam,Thailand etc.
We had precise perfect machining capacity and group of experienced engineers and technicians to ensure high quality machines and great after-sales service to costumers. Every machine is owing high reputation for customers and creating a well-known brand in ceramic industry filed.
"providing opportunities to made talent, working down to the earth and win great business future" is our company operation philosophy.
We are working in professional way to win your trust, and full of confidence to meet challenges!
FAQ
Q1: Are you manufacturer?
A:Yes.We are manufacturer of more than 20 years.
Q2: What kind of packing of your goods?
A: We usually provide wooden case packing for goods by sea and ply wood case packing f or goods by air/express delivery.Alsowe also use cartons packing with ply wood pallet for some products.
Q3: How long is the delivery time?
A: Generally it is 2-5 days if the goods are in stock. Or it is 15-20 days if the goods are not in stock, it is according to quantityBut for customized products, there will be different production cycles according to different needs
Q4: Can you ship the goods to my destination port or my address?
A:Yes. We can do EXW FOB CNF or CIF shipment term for you. And we can help you arrange the delivery.By air or by sea or by express delivery is ok.
If you have any other questions, please feel free to contact us.
You Might Also Like
Triac 0-10V Dali Dimmable Recessed LED Downlight/ COB LED Ce......
GMP Factory Supply Food Grade Phycocyanin Spirulina Extract
Table Tennis Racket with Rubber + Bag Ping Pong Bat
3mh Cool Giant Fat Inflatable Cat Cartoon for Advertising
Mslfp14 17*17 Wired Box Size X-ray Digital Flat Panel Detect......
Portable Glass Shape Edge Polishing Machine
A4 A3 Paper Wrapping Machine
Stainless Steel Angle Tube Strainer
Sinchold 9220/20/45 Forged Steel Welded Crane Rail Clips
Warehouse Tent Made by Superb Tent
Thyristor Rectified CO2 MIG Mag Arc Welding Machine