new fire fighting safety rubber boots

China new fire fighting safety rubber boots, Find details and Price about China safety boots, leather boots from new fire fighting safety rubber boots

Model NO.
RPX-25A
Acid and Alkali Resistant
Acid and Alkali Resistant
Lining Material
Kevlar
Hand Made
Not Handmade
Gender
Unisex
Trademark
HCXF
Transport Package
Air/Ship
Origin
Jiujiang
Model NO.
RPX-25A
Acid and Alkali Resistant
Acid and Alkali Resistant
Lining Material
Kevlar
Hand Made
Not Handmade
Gender
Unisex
Trademark
HCXF
Transport Package
Air/Ship
Origin
Jiujiang
The item detail information:
1. this product conforms to the requirements of GA 6-2004 Firefighter Fire Protection boots standard.

2. Usage: Suitable for fire fighting and rescue operations in general fire and accident sites, but not for chemical accident sites with strong corrosive liquids and gases, and disaster sites with strong penetrating poisons, biological viruses and ultra-high voltage, etc.

3. Introduction: The main body of the protective boot leather is black. There are yellow flame retardant and reflective marking belts on the back and side of the boot. The boot is made of flame retardant waterproof leather and flame retardant rubber. The overall design of leather boots is simple, beautiful and durable.

In order to increase the anti-puncture performance of the boot head, an aluminum anti-puncture bale head is arranged in the boot head, and the bottom of the boot is puncture-proof and portable with Kevlar material. At the same time, the sole of the boot adopts the anti-skid design, and the boot barrel has the functions of waterproof and anti-cutting, which enhances the overall safety performance of the protective boots. The inside of the leather boots is fastened with flame retardant zippers to facilitate the rapid wearing of firemen. The knitted waterproof and permeable socks and antibacterial and antiseptic cushioning boots are used to improve the comfort of leather boots.

4. performance parameters:
1) Waterproofing performance of the whole boot: the fire-fighting boot is placed in the container and injected with water. The distance between the water surface and the lowest point of the boot barrel is not more than (25 +/- 3) mm. After 4 hours, there is no water infiltration in the boot.

2) Bottom/outsole bonding strength: except the suture bottom, the bonding strength is greater than or equal to 4.0N/mm when tested by GB/T 20991-2007 5.2 method; if the sole is torn, the bonding strength is greater than or equal to 3.0N/mm.

3) Anti-puncture and bending performance: According to GB/T 20091-2007 5.9 test method, no visual crack marks appeared after 1 x 104 times of flexion.

4) Flame Retardant Performance: The damage length of each test point on fire extinguishing boots is less than 100 mm, the self-extinguishing time is less than 2 seconds, and no melting, droplets or peeling occurs.


5) weight: the total weight of the whole 255 pairs of boot boots is less than 2.3kg.


new fire fighting safety rubber boots
new fire fighting safety rubber boots


new fire fighting safety rubber boots
new fire fighting safety rubber boots