Adapt to the environment
This product is suitable for hand protection when rescuers operate ropes and other rescue tools in water rescue. Gloves are anti-skid, bite-proof, wear-resistant, warm and comfortable.

Structure
1. Style: horseshoe-shaped wrist mouth, five fingers, beautiful wrist mouth, easy to take off.
2. 3D three-dimensional design, the fingers of gloves are in a natural bending state, which fits the natural curvature of hands, conforms to human efficiency, is comfortable and flexible to operate, and effectively relieves hand fatigue.
3. High-elasticity chloroprene rubber composite fabric is adopted, which has good elasticity, comfortable hand-sticking, and high warmth retention.
4. Joints are designed by gluing and blind joint, which has durability and warmth retention.
5. The zipper opening at the wrist is designed to enlarge the opening width when necessary, which is convenient for wearing.
6, palm, finger reinforcement, anti-slip design, to ensure that you can get anti-slip and good hand protection when you use your hand to paddle and operate the rope. 7. Gloves as a whole have the functions of sun protection, bite prevention, cold prevention and damage prevention.

Materials
Main fabric: 5mm chloroprene rubber composite fabric
Reinforcing, antiskid and antiskid fabrics
Zipper: YKK zipper
Glove color: light green

Maintenance
1, should arrange full-time personnel responsible for the custody and maintenance;
2. Scrub with clean water, and use neutral detergent in proper amount. The water temperature is not more than 30 degrees Celsius, and the strength is gentle. It can be cleaned with a soft brush, and hung in a cool and dry place to drip dry. Do not blow dry with a hair dryer or bake with electric heating equipment. Do not wipe with organic solvents such as alcohol and gasoline or corrosive liquids such as acid and alkali. It is not recommended to use detergents containing bleaching agents and abrasives. Do not use hard objects to remove dirt stuck on gloves by scraping or digging.
3. Store in a cool, natural, ventilated and dry storage environment, avoid high temperature, high humidity and high salt environment, avoid heavy pressure, avoid contact with open flames, chemicals and sharp hard objects, keep away from welding, cutting and heat sources, and avoid direct sunlight.

Note
1. Before use, the gloves should be carefully checked: the shape is correct, the color is commensurate, the folded parts have no obvious folds, the whole is neat, and there is no abnormal damage such as breakage, thread opening, fading and excessive stretching. Whether it is corroded, softened or hardened by chemical substances, and whether it is stained with oil stains that can not be washed away for a long time. Auxiliary parts and accessories shall be complete and firm, without abnormal damage such as opening, deformation, cracking, corrosion, mildew and aging. The main parts of the fabric are free from warp breakage, weft breakage, yarn skipping, splitting and other defects. The stitch spacing is even and straight, and the upper and lower lines coincide. There are no empty stitches, missing stitches, jumping stitches or broken wires in key parts. Plastic parts shall be free from abnormal damages such as cracks, depressions, bubbles, inclusions, bulging and flash, and the surface shall be free from serious scratches, scratches and caving. It can be used only after it is confirmed to be in good condition. In case of abnormal damage, stop using it and replace it with a new one.
2, gloves, should abide by the product quality standards and operating procedures, the correct use in applicable occasions. During use, avoid rubbing and touching rough and sharp objects, and avoid dragging and rolling on the hard surface of the ground. Do not disassemble, replace or modify accessories by yourself, do not contact with corrosive chemicals or solvents such as oil stains, acids and alkalis, do not apply paints, solvents, self-adhesive stickers and other items on the outer surface of gloves, and do not expose to the sun for a long time.
3. Gloves should be stored separately to prevent exposure to the sun. They should not be mixed with hard objects, sharp objects or other clothes, squeezed, or exposed to corrosive chemicals such as acid and alkali.
4. Lightly unload during transportation. It is suitable to use a strong outer packing box filled with flexible packaging materials to avoid possible physical and chemical damage during transportation.