GPS&Beidou Engine Module Supersensitivity Sony Gnss Module

China GPS&Beidou Engine Module Supersensitivity Sony Gnss Module, Find details about China GPS Module Antenna, GPS Engine Module Antenna from GPS&Beidou Engine Module Supersensitivity Sony Gnss Module

Basic Info.

Model NO.

DL-1513N-GCMF

Chip Set

Mediatek Mt3339

Package

Plastic Tray , Paper Cartoon

Communication Type

Uart/Ttl

Trademark

DeliNComm

Transport Package

Plastic Tray, Paper Cartoon

Specification

Module Size: 15.3x13.2x7.5mm

Origin

China

Model NO.

DL-1513N-GCMF

Chip Set

Mediatek Mt3339

Package

Plastic Tray , Paper Cartoon

Communication Type

Uart/Ttl

Trademark

DeliNComm

Transport Package

Plastic Tray, Paper Cartoon

Specification

Module Size: 15.3x13.2x7.5mm

Origin

China

Product Desciption

General Description

The Delin DL-1513N-GCMF is a complete GPS engine module that features super sensitivity, ultra low power and small form factor. The GPS signal is applied to the antenna input of module, and a complete serial data message with position ,velocity and time information is presented at the serial interface with NMEA protocol or custom protocol.
Its -165dBm tracking sensitivity extends positioning coverage into place like urban canyons and dense foliage environment where the GPS was not possible before. The small form factor and low power consumption make the module easy to integrate into portable device like PNDs, mobile phones, cameras and vehicle navigation systems.

Applications

LBS (Location Based Service)
PND (Portable Navigation Device)
Vehicle navigation system
Mobile phone

Features

Build on high performance, low-power MediaTek MT3339 chip set
Ultra high Track sensitivity: -165dBm
Extremely fast TTFF at low signal level
Built in high gain LNA
Low power consumption: Max 28mA@3.3V
NMEA-0183 compliant protocol or custom protocol
Operating voltage: 2.8V to 4.3V
Operating temperature range:-40to85ºC
Patch Antenna Size: 12x12x4mm
Module Size: 15.3x13.2x7.5mm
Communication type: UART/TTL
RoHS compliant (Lead-free)

1.2.Power Supply

Regulated power for the DL-1513N-GCMF is required. The VCC Pin Need a stable DC voltage supply. Power supply ripple must be less than 30mV. The input voltage Vcc should be 2.8V~4.3V, Recommended power supply voltage is 3.3V . maximum current is 28mA. Suitable decoupling must be provided by external decoupling circuitry.

1.3.UART Ports

The module supports two full duplex serial channels UART. All serial connections are at 3V CMOS logic levels, if need different voltage levels, use appropriate level shifters. The baud rate of both serial ports are fully programmable, the data format is however fixed: X, N, 8, 1, i.e. X baud rate, no parity, eight data bits and one stop bit, no other data formats are supported, LSB is sent first. The modules default baud rate is set up 9600bps, however, the user can change the default baud rate to any value from 4800 bps to 115kbps. UART port can be used for firmware upgrade, NMEA output and PMTK proprietary commands input.

2.Application

The module is equipped with a 5-pin pad that connects to your application platform. The DL-1513N-GCMF module It consists of a MediaTek MT3339 single chip GNSS IC which includes the RF part and Baseband part, a patch antenna, a LNA, a SAW filter, a TCXO, a crystal oscillator.

2.1. Pin Assignment

GPS&Beidou Engine Module Supersensitivity Sony Gnss Module

Figure 2: Pin Assignment

2.2.Mechanical Dimensions

This chapter describes the mechanical dimensions of the DL-1513N-GCMF module. Size unit(mm)

GPS&Beidou Engine Module Supersensitivity Sony Gnss Module