Products

Pedometer/Speedometer/Drone Dm2107 Delincomm Compact Mediatek Mt333 Chip GPS Smart Antenna Module

China Pedometer/Speedometer/Drone Dm2107 Delincomm Compact Mediatek Mt333 Chip GPS Smart Antenna Module, Find details about China Delincomm GPS Modules, Mediatek GPS Modules from Pedometer/Speedometer/Drone Dm2107 Delincomm Compact Mediatek Mt333 Chip GPS Smart Antenna Module

Model NO.
DM2107
Built in High Gain
Lna
RoHS Compliant
Yes
Communication Type
Uart/Ttl
Trademark
DelinComm
Transport Package
Carton
Specification
NMEA-0183
Origin
China
HS Code
8517707090
Model NO.
DM2107
Built in High Gain
Lna
RoHS Compliant
Yes
Communication Type
Uart/Ttl
Trademark
DelinComm
Transport Package
Carton
Specification
NMEA-0183
Origin
China
HS Code
8517707090
General Description

 Delin Comm DM2107-R is a complete GPS engine module that features super sensitivity, ultra low power and small form factor.it with superior and performance even in urban canyon and dense foliage environment.
This module supports self-generate orbit prediction, EASYTM, to achieve faster cold start and warm start. The EASYTM is no need of both network assistance and host CPU's intervention. The predication is valid for up to 3 days and updates automatically from time to time when GPS module is powered on and satellites are available.
 

Features
  1. Build on high performance, low-power MediaTek MT3337 chip set
  2. Ultra high Track sensitivity: -165dBm
  3. Extremely fast TTFF at low signal level
  4. Built in high gain LNA
  5. Low power consumption: Max 28mA@3.3V
  6. NMEA-0183 compliant protocol or custom protocol
  7. Operating voltage: 2.8V to 4.3V
  8. Operating temperature range:-40to85ºC
  9. Patch Antenna Size: 20x6x3.5mm
  10. Module Size: 21x7.0x6.6mm
  11. Communication type: UART/TTL
  12. RoHS compliant (Lead-free)
  13. IATF16949 quality control

    1. Power Supply
 Regulated power for the DM2107-R is required. The VCC Pin Need a stable DC voltage supply. Power supply ripple must be less than 30mV. The input voltage Vcc should be 2.8V~4.3V, Recommended power supply voltage is 3.3V . maximum current is 20mA. Suitable decoupling must be provided by external decoupling circuitry.
 
  1. UART Ports 
  2. The module supports two full duplex serial channels UART. All serial connections are at 3V CMOS logic levels, if need different voltage levels, use appropriate level shifters. The baud rate of both serial ports are fully programmable, the data format is however fixed: X, N, 8, 1, i.e. X baud rate, no parity, eight data bits and one stop bit, no other data formats are supported, LSB is sent first. The modules default baud rate is set up 9600bps, however, the user can change the default baud rate to any value from 4800 bps to 115kbps. UART port can be used for firmware upgrade, NMEA output and PMTK proprietary commands input.

You Might Also Like