Products

RF Power Amplifier Modules

China RF Power Amplifier Modules, Find details about China PA Module from RF Power Amplifier Modules

Model NO.
BT-YF925-35/U15D4253-Z2
Trademark
BOOSTEL
Transport Package
Carton
Specification
145*110*20.5mm
Origin
China
HS Code
8517629900
Model NO.
BT-YF925-35/U15D4253-Z2
Trademark
BOOSTEL
Transport Package
Carton
Specification
145*110*20.5mm
Origin
China
HS Code
8517629900
FDD900Mhz Power Amplifier Module
BT-YF925-35/U15D4253-Z2
 
ItemsDownlinkUplink
Frequency rang(MHz)925-960880-915
Output Power@(25ºC)42±1dBm 
 ALCOutput Power keep Max.Output Power±1.5dB            @(20dB>Input signal increased>10dB)
Gain(25ºC)≤53±2dB≤15±2dB
Out of Band RejectionBuilt-in SAW FilterBuilt-in SAW Filter
Gain Adjustable rang≥30dB
Step of Gain Adjustable≤1dB
Error of Gain AdjustableWhen Gain adjustable rang≤20dB
Total error≤±1dB @ 0~20dB
When Gain adjustable rang>20dB
Total error ≤ ±1.5dB @>20dB
EVM≤5%(r.m.s)
Spurious EmissionComply with 3GPP TS 25.106 V6.0.0
In Band Ripple≤3dB
Frequency Error ≤0.01ppm
VSWR≤1.4
Noise Figure ≤3
Group delay time≤1μs
Max. Input Power no Damage+10dBm(CW)-10dBm(CW)
Power Supply+28V; ≤3.0A
Power amplifier efficiency ≥25%
Operating Temperature-40~+55ºC
 
A. POWER-6 Connector for Power Supply& Monitor,Pin definition:
PIN 1 -->RS485A; 
PIN 2 -->RS485B;
PIN 3 -->GND;
PIN 4 -->GND; 
PIN 5 -->NC;
PIN 6 -->+28V;  
B. RF Connector: SMA-50KFD

C. Monitoring functions
  1. Module address(default=2, settable);
  2. PA setup function: PA=ON/OFF, ALC, ATT;
  3. PA Query function: Working status(on/off,input/output, Revers power, Temperature, VSWR, ATT, ALC, PA Input power,or LNA output power), Alarm(over Temperature,VSWR, PA  Fault);
  4. Over Temperature Alarm:Alarm threshold +85ºC,  meanwhile switch off PA, When  Temperature lower to +80ºC, switch on PA automatically.
  5. PA Fault Alarm: Low gain Alarm;
  6. Amplifier temperature detection: Temperature detection rang including but not limited -40ºC~+85ºC,  Detection accuracy<±3ºC;
  7. PA Forward Power detection: Detect total power, Modulated signal test, detection rang 25dBm~46dBm, Detection accuracy<±2dBm;
  8. PA Revers Power detection: Detect total power, Modulated signal test detection rang 25dBm~46dBm, Detection accuracy<±2dBm;
  9. PA  Input power detection: Detect total power, Modulated signal test detection rang-20dBm~4dBm, Detection accuracy<±2dBm;
  10. LNA  Setup: ATT
  11. LNA  Query: ATT
 
     D. Dimensions

RF Power Amplifier Modules

 

You Might Also Like