Products

FDD1800MHz Power Amplifier Module

China FDD1800MHz Power Amplifier Module, Find details about China RF Power Amplifier, Modules from FDD1800MHz Power Amplifier Module

Model NO.
BT-YF1805-75/U18D4355-Z1
Trademark
BOOSTEL
Transport Package
Carton
Specification
145*110*20.5mm
Origin
Shenzhen
HS Code
8517629900
Model NO.
BT-YF1805-75/U18D4355-Z1
Trademark
BOOSTEL
Transport Package
Carton
Specification
145*110*20.5mm
Origin
Shenzhen
HS Code
8517629900
FDD1800Mhz Power Amplifier Module

BT-YF1805-75/U18D4355-Z1
 
ItemsDownlinkUplink
Frequency rang(MHz)1805-18801710-1785
Output Power@(25ºC)43±1dBm 
 ALCOutput Power keep Max.Output Power±1.5dB            @(20dB>Input signal increased>10dB)
Gain(25ºC)≤55±2dB≤18±2dB
Out of Band Rejection≥15dB@832~862MHz (Built-in SAW Filter)≥15dB@791~821MHz    (Built-in SAW Filter)
Gain Adjustable rang≥30dB
Step of Gain Adjustable≤1dB
Error of Gain AdjustableWhen Gain adjustable rang≤20dB
Total error≤±1dB @ 0~20dB
When Gain adjustable rang>20dB
Total error ≤ ±1.5dB @>20dB
EVM≤5%(r.m.s)
Spurious EmissionComply with 3GPP TS 25.106 V6.0.0
In Band Ripple≤±1.5dB
Frequency Error ≤0.01ppm
VSWR≤1.4
Noise Figure ≤3
Group delay time≤1μs
Max. Input Power Without Damage+10dBm(CW)-10dBm(CW)
Power Supply+28V; ≤3.0A
Power amplifier efficiency ≥25%
Operating Temperature-40~+55ºC
 
A. POWER-6 Connector for Power Supply& Monitor,Pin definition:
PIN 1 -->RS485A; 
PIN 2 -->RS485B;
PIN 3 -->GND;
PIN 4 -->GND; 
PIN 5 -->NC;
PIN 6 -->+28V;  
B. RF Connector: SMA-50KFD

C. Monitoring Functions
 
  1. Module address(default=3, settable);
  2. PA setup function: PA=ON/OFF, ALC, ATT;
  3. PA Query function: Working status(on/off,input/output, Revers power, Temperature, VSWR, ATT, ALC, PA Input power,or LNA output power), Alarm(over Temperature,VSWR, PA  Fault);
  4. Over Temperature Alarm:Alarm threshold +85ºC,  meanwhile switch off PA, When  Temperature lower to +80ºC, switch on PA automatically.
  5. PA Fault Alarm: Low gain Alarm;
  6. Amplifier temperature detection: Temperature detection rang including but not limited -40ºC~+85ºC,  Detection accuracy<±3ºC;
  7. PA Forward Power detection: Detect total power, Modulated signal test, detection rang >20dBm, Detection accuracy<±2dBm;
  8. PA Revers Power detection: Detect total power, Modulated signal test detection rang >20dBm, Detection accuracy<±2dBm;
  9. PA  Input power detection: Detect total power, Modulated signal test detection rang>15dBm, Detection accuracy<±2dBm;
  10. LNA  Setup: ATT
  11. LNA  Query: ATT

    D. Dimensions

FDD1800MHz Power Amplifier Module

 

 

You Might Also Like