High Performance Rapid Temp. Change Chamber with Tecumseh Compressor

China High Performance Rapid Temp. Change Chamber with Tecumseh Compressor, Find details about China Climate Chamber, Temperature Change Test Equipment from High Performance Rapid Temp. Change Chamber with Tecumseh Compressor

Model NO.
ESS-225LL5-G
Power Source
AC380V
Working Chamber Volume (L)
225L
Temp. Rate of Change Oc/Min
3-15
Ramp Temp. Range
-70oc~+100oc(Rapid Temp. Change -40oc~+85ocfull Li
Temp. Constancy
+/-3.0oc
Colling Mode
Water Cooled
Heater
Iron-Chrome Wire Heater
Compressor
France Imported Tecumseh Semi-Hermetic Compressor
Blower
Centerifugal Blower
Power
AC380+/-10% 50Hz 3phase4wires+Groud Wires
Standard Accessories
Sight Window, Cable Port, Baffle, Baffle Frame*2,
Trademark
KOMEG
Transport Package
Strong Plywood Case, Meet International Standard
Specification
Standard and Customized
Origin
Dongguan, China
HS Code
90321000
Model NO.
ESS-225LL5-G
Power Source
AC380V
Working Chamber Volume (L)
225L
Temp. Rate of Change Oc/Min
3-15
Ramp Temp. Range
-70oc~+100oc(Rapid Temp. Change -40oc~+85ocfull Li
Temp. Constancy
+/-3.0oc
Colling Mode
Water Cooled
Heater
Iron-Chrome Wire Heater
Compressor
France Imported Tecumseh Semi-Hermetic Compressor
Blower
Centerifugal Blower
Power
AC380+/-10% 50Hz 3phase4wires+Groud Wires
Standard Accessories
Sight Window, Cable Port, Baffle, Baffle Frame*2,
Trademark
KOMEG
Transport Package
Strong Plywood Case, Meet International Standard
Specification
Standard and Customized
Origin
Dongguan, China
HS Code
90321000
Benifits more than you can get from other supplier
1. Dedicatetouch and excellent user experience
2. Unique and compact design, top grade appearance, stable performance and easy operation
3. Can simulate a wide rang of temperature and humidity environments
4. Capable of testing large components, assemblies, and finished products
5. Customized sizes and configurations available
6. One year warranties
Welcome to KOMEG virtual office!

Applications
Temperature adaptability test under the condition of rapid change, or gradient for electrical, electronic, instruments and other products or spareparts, particularly applies to environmental stress screening test(ESS)

Feature:
1) Temp Range: -55º C~125º C
2) Inside size: 700*700*480mm(W*H*D),
Outside size; Around 980*1900*1800mm
3) Temperature change rate: 3º C~15º C/min
4) Dell time: 30min
5)Static load weight: Less than 30KG.
6) Precooling time: RT~-70º C: 80min
7) Temperature stability: ± 0.5º C
8)Fluctuation for ramp up/down: ± 3.0º C(with empty load)
9) Temperature uniformity: ± 2.0º C (with empty load)
10) Noise: Less than 72dB

Standards:
GB10592-89 Technical requirements for high and low temperature test chamber
GB2423.1-1989 Low temperature test
GB2423.2-1989 High temperature test mode

The following is Technical parameters:
Specifications 
Model ESS-SL
225SL5225SL10408SL5408SL101000SL51000SL101000SL15
Working Chamber Volume(L)2254081000
Temp Rate of Change( ºC/Min)51051051015
Performance -70ºC~+100ºC 
Rapid Temp Change -55ºC~+85ºC Full Linear Control
Humidity Constancy±0.5ºC
Temp Constancy±3.0ºC
Exterior MaterialCold-rolled steel sheet (Rust proof & Plastic Spray treated )/ Stainless Steel
Interior Material Stainless Steel Plate(SUS 304)
Insulation MaterialRigid Polyurethane Foam
Safety Devicesover pressure,over heat and over current protection for compressor, over temp. protection,
CompressorSemi-Hermetic Compressor
Cooling ModeWater Cooled
Control systemBalanced Temperature & Humidity Control System(BTC type)
HeaterIron-chrome wire heater
BlowerCentrifugal Blower
Observation WindowGlass incorporating heat generator
Temp SensorPt-100 
ControllerTouch screen programmable controller 
Ambient Temp.+5ºC~+35ºC
PowerAC 380V/50Hz 3phase 5 wires+ Ground wire 
Note: 1. We reserve the right to change specifications without prior notice 2. Customized sizes and configurations available
Specifications 
Model ESS-LL
225LL5225LL10408LL5408LL101000LL51000LL10
Working Chamber Volume(L)2254081000
Temp Rate of Change( ºC/Min)510510510
Performance -70ºC~+100ºC 
Rapid Temp Change -40ºC~+85ºC Full Linear Control
Humidity Constancy±0.5ºC
Temp Constancy±3.0ºC
Exterior MaterialCold-rolled steel sheet (Rust proof & Plastic Spray treated )/ Stainless Steel
Interior Material Stainless Steel Plate(SUS 304)
Insulation MaterialRigid Polyurethane Foam
Safety Devicesover pressure,over heat and over current protection for compressor, over temp. protection,
CompressorSemi-Hermetic Compressor
Cooling ModeWater Cooled
Control systemBalanced Temperature & Humidity Control System(BTC type)
HeaterIron-chrome wire heater
BlowerCentrifugal Blower
Observation WindowGlass incorporating heat generator
Temp SensorPt-100 
ControllerTouch screen programmable controller 
Ambient Temp.+5ºC~+35ºC
PowerAC 380V/50Hz 3phase 5 wires+ Ground wire 
Note: 1. We reserve the right to change specifications without prior notice 2. Customized sizes and configurations available