Industrial 2 Serial Ports RS232/485/422 to Ethernet Server Converter St-TCP510I

China Industrial 2 Serial Ports RS232/485/422 to Ethernet Server Converter St-TCP510I, Find details about China Ethernet Serial Server, Ethernet RS485 Device Server from Industrial 2 Serial Ports RS232/485/422 to Ethernet Server Converter St-TCP510I

Model NO.
ST-TCP510i
Processor
Ti Cortex M4
Serial Port Number
1 RS232 1 RS485
Serial Interface Standard
RS-232: dB9 Pin Type, RS-485: 2 Wire, RS-422
Baud Rate
RS-232: 600 BPS ~ 230K BPS, RS-485: 600 BPS ~ 1m
Ethernet Port Number
1
Ethernet Interface Standard
RJ45
Network Protocol
IP, TCP, UDP, DHCP, DNS, Https, ARP, ICMP, Web
Trademark
FOCUS
Transport Package
Box+Carton
Specification
88 x 81 x 24 mm
Origin
Shandong
HS Code
8517629900
Model NO.
ST-TCP510i
Processor
Ti Cortex M4
Serial Port Number
1 RS232 1 RS485
Serial Interface Standard
RS-232: dB9 Pin Type, RS-485: 2 Wire, RS-422
Baud Rate
RS-232: 600 BPS ~ 230K BPS, RS-485: 600 BPS ~ 1m
Ethernet Port Number
1
Ethernet Interface Standard
RJ45
Network Protocol
IP, TCP, UDP, DHCP, DNS, Https, ARP, ICMP, Web
Trademark
FOCUS
Transport Package
Box+Carton
Specification
88 x 81 x 24 mm
Origin
Shandong
HS Code
8517629900

ST-TCP510i
1 Port Ethernet Device Servers

Industrial 2 Serial Ports RS232/485/422 to Ethernet Server Converter St-TCP510I
 

1 port Ethernet device servers ST-TCP510I can realize bi-directional transparent transmission between RS232/RS485/RS422 and network.

1-port RS-232/422/485 Ethernet device servers
Power supply accepts wide voltage input range DC 5-36V
Support TCP server/client, UDP server/client, https client, Virtual COM
Support Modbus RTU to Modbus TCP
Support flow control CTS/RTS, XON/XOFF
Support 1 RS-232, RS-485/422 3IN1 serial port to 1 10/100Base-T(X) self-adaptive Ethernet interface
Configuration via Web Server page, AT commands, and Windows Utility
MQTT/SSL special firmware (contact sales)


Introduction of Ethernet device servers ST-TCP510I
1 port Ethernet device servers ST-TCP510I can realize bi-directional transparent transmission between RS232/RS485/RS422 and network. Simple settings via webpage or setup software can assign working details.
Ethernet device servers ST-TCP510I are based on ARM processor and it is internally integrated with TCP/IP protocol. User can easily realize embedded device networking.
Industrial 2 Serial Ports RS232/485/422 to Ethernet Server Converter St-TCP510I

Character of 1-port RS232/422/485 Ethernet device servers ST-TCP510I

 
Industrial SolutionTI Cortex M4 Solution, work temp at -40~85C
Power SupplyDC/Terminal type 5V~36V
Serial PortRS232/RS485/RS422, 3-in-1 serial port
Serial SignalRS232: TX/RX, CTS/RTS RS485:A/B/G
Flow ControlSoftware: XON/XOFF
Modbus GatewayModbus TCP to Modbus RTU in bi-directional Modbus Polling
Advanced Character-Network Printing
-Web socket: Serial to Webpage
-Modify MAC
-Hardware watchdog
-ARP of server domain name
CertificationCE/FCC/RoHS/WEEE
Work ModeTCP Server/ TCP client/ UDP Server/UDP Client/ httpsD Client
Built-in web pageCustomized web page is acceptable
ProtectSurge Protection, ESD 2KV, for more harsh industrial environment

Technical Parameters
 
System Information
ProcessorCortex-M4
Basic Frequency120MHz
Flash512K byte
Ethernet
Port Number1
Interface Standard8 pin RJ45
Rate10/100 Mbps, MDI/MDIX, auto switch between cross and direct connection
Protection2KV electromagnetism isolation, shell insulation blocking
Network ProtocolIP,TCP,UDP,DHCP,DNS,HTTP,ARP,ICMP,Web socket,Httpd client
Receive BufferMax 16k bytes buffer
Serial
Port Number1
Interface StandardRS-232: DB9 pin type, RS-485: 2 wire (A+,B-), RS-422 (A,B,Y,Z)
Data Bits5,6,7,8
Stop Bit1,2
Check BitNone,Even,Odd,Space,Mark
Baud Rate600bps ~ 230.4Kbps
Flow ControlRTS/CTS
BufferSend and receive 2k bytes respectively
ProtectionRS-485: anti-static 2KV,lightning protection
RS-485 Pull-up and Pull-Down Resistor2.2 KΩ
Software
Virtual SerialWindows 2000 or higher(32 bit/64 bit)
ConfigurationBuilt-in webpage, computer set-up software, serial command
Basic Parameter
Size88 x 81 x 24 mm
Operating Temp.-40 ~ 85°C (industry)
Storage Temp.-40 ~ 85°C, 5 ~ 95% RH (no condensation)
Input VoltageDC 5 ~ 36V
Working Current53mA @ 12V
Power<1W
More
CertificateCE,FCC,ROHS
Warranty2 years

 

Industrial 2 Serial Ports RS232/485/422 to Ethernet Server Converter St-TCP510IIndustrial 2 Serial Ports RS232/485/422 to Ethernet Server Converter St-TCP510IIndustrial 2 Serial Ports RS232/485/422 to Ethernet Server Converter St-TCP510I
Application

  • Industrial data transmission, industrial automation
  • security and protection monitoring, public security
  • Smart home, power control, environmental monitoring, intelligent agriculture
  • Door check on work attendance system, POS system, rice selling system
  • Building automation system, power monitoring, self-service banking system, telecom machine room monitoring



Electrical Fire Network Monitoring
ST-TCP510I communicates with the RS232/485 serial port of the electric fire alarm, and transmits the alarm information to the cloud platform quickly to remind the staff to eliminate the fire.

Industrial 2 Serial Ports RS232/485/422 to Ethernet Server Converter St-TCP510I

Smart Lighting Facilities in Factories and Mines Monitoring
The traditional lighting facilities in factories and mines are mostly controlling by people, and cannot realization linkage between manufacture and monitoring, and lead to energy wasting. ST-TCP510I communicates with serial lighting equipment via network, it is convenient for lighting control and can initiative report the mistakes of the equipment.
Industrial 2 Serial Ports RS232/485/422 to Ethernet Server Converter St-TCP510I

Water Supply System Monitoring
Recently the hoc communication of water supply system in waterworks is still based on serial, and it is only suitable for single-machine operation and limited transmission distance, system maintenance is difficult. ST-TCP510i supports serial port to network, monitor the work of the equipment via TCP Server mode at any time.

Industrial 2 Serial Ports RS232/485/422 to Ethernet Server Converter St-TCP510I


Industrial 2 Serial Ports RS232/485/422 to Ethernet Server Converter St-TCP510I