Products

4 Serial Port RS232 to Ethenret Converter St-TCP540I

China 4 Serial Port RS232 to Ethenret Converter St-TCP540I, Find details about China Ethernet Serial Server, Ethernet to Serial Module Converter from 4 Serial Port RS232 to Ethenret Converter St-TCP540I

Model NO.
ST-TCP540i
Processor
Cortex M4
Serial Port Number
4 (RS232/485/422*2)
Serial Interface Standard
RS-232: dB9 Pin Type, RS-485: 2 Wire, RS-422
Baud Rate
RS-232: 600 BPS ~ 230K BPS, RS-485: 600 BPS ~ 1m
Ethernet Port Number
1
Ethernet Interface Standard
8 Pin RJ45
Network Protocol
IP, TCP, UDP, DHCP, DNS, Https, ARP, ICMP, Web
Trademark
FOCUS
Transport Package
Box+Carton
Specification
222 x 122 x 29 mm
Origin
Shandong
HS Code
8517629900
Model NO.
ST-TCP540i
Processor
Cortex M4
Serial Port Number
4 (RS232/485/422*2)
Serial Interface Standard
RS-232: dB9 Pin Type, RS-485: 2 Wire, RS-422
Baud Rate
RS-232: 600 BPS ~ 230K BPS, RS-485: 600 BPS ~ 1m
Ethernet Port Number
1
Ethernet Interface Standard
8 Pin RJ45
Network Protocol
IP, TCP, UDP, DHCP, DNS, Https, ARP, ICMP, Web
Trademark
FOCUS
Transport Package
Box+Carton
Specification
222 x 122 x 29 mm
Origin
Shandong
HS Code
8517629900

ST-TCP540i
4 Ports Serial to Ethernet Servers
4 Serial Port RS232 to Ethenret Converter St-TCP540I

ST-TCP540I is a 4-port Serial to IP Converters. THE IOT's serial to IP Converters ST-TCP540I can realize bi-directional transparent transmission between RS232/RS485/RS422 and network.

4-port RS-232/422/485 Serial to IP Converters
Power supply accepts wide voltage input range DC 9-36V
Support TCP server/client, UDP server/client,https client, Virtual COM
Support Modbus RTU to Modbus TCP
Support flow control CTS/RTS, XON/XOFF
Support 4 RS-232, RS-485/422 3IN1 serial port to 1 10/100Base-T(X) self-adaptive Ethernet interface
Configuration via Web Server page, AT commands, and Windows Utility

Technical parameters

System Information
ProcessorCortex-M4
Basic Frequency120MHz
Flash512K byte
Ethernet
Port Number1
Interface Standard8 pin RJ45
Rate10/100 Mbps, MDI/MDIX, auto switch between cross and direct connection
Protection2KV electromagnetism isolation, shell insulation blocking
Network ProtocolIP,TCP,UDP,DHCP,DNS,https,ARP,ICMP,Web socket,httpsd client
Receive BufferMax 16k bytes buffer
Serial
Port Number4 (Each port can work as RS-232,RS-485 and RS-422, can work at the same time)
Interface StandardRS-232: DB9 pin type, RS-485: 2 wire (A+,B-), RS-422 (A,B,Y,Z)
Data Bits5,6,7,8
Stop Bit1,2
Check BitNone,Even,Odd,Space,Mark
Baud Rate600bps ~ 230.4Kbps
Flow ControlRTS/CTS XON XOFF
BufferSend and receive 2k bytes respectively
ProtectionRS-485: anti-static 2KV,lightning protection
RS-485 Pull-up and Pull-Down Resistor2.2 KΩ
Software
Virtual Serial(THE-VCOM)Windows 2000 or higher(32 bit/64 bit)
ConfigurationBuilt-in webpage, computer set-up software, serial command
Basic Parameter
Size222 x 122 x 29 mm (including shell and terminals)
Operating Temp.-40 ~ 85°C (industry)
Storage Temp.-40 ~ 85°C, 5 ~ 95% RH (no condensation)
Input VoltageDC 9 ~ 36V
Working Current53mA @ 12V
Power<1W
More
CertificateCE,FCC,ROHS
Warranty2 years
 

4 Serial Port RS232 to Ethenret Converter St-TCP540I
Basic Function of 4-port Serial to IP Converters

Serial to IP converters ST-TCP540I

  1. Each one can worked as RS232, RS485, RS422
  2. Baud rate: 600bps~ 230.4Kbps
  3. Hardware fow control: RTS/CTS
  4. Software fow control: XON/XOFF
  5. Fexible packet of serial data

Serial Port Switching Among RS232/RS485/RS422

Works at RS232 port by default Please use converter plat for RS422 or RS485 port and select corresponding port via webpage or setup software or manually adjust under dial switch mode

4 Serial Port RS232 to Ethenret Converter St-TCP540I
4 Serial Port RS232 to Ethenret Converter St-TCP540I

Work mode

TCP Server

Serial to IP converters ST-TCP540I listen on the setting port and waits for a TCP client connection.The data which the serial ports sent out transparently transmit to all connected client via Serial to IP converters ST-TCP540i.
4 Serial Port RS232 to Ethenret Converter St-TCP540I

TCP client mode

Serial to IP converters ST-TCP540I initiate a TCP lint to the set IP address. If the connection fails, ST-TCP540I will keep trying to reconnect until it succeeds. Once the link is successful, the data will be transparently transmitted between PC and serial device in bi-directional.
4 Serial Port RS232 to Ethenret Converter St-TCP540I

UDP mode

Serial to IP converters ST-TCP540I sent the data to designated IP /Port. If the connection fails, ST-TCP540I will keep trying to reconnect until it succeeds. Meanwhile, ST-TCP540I listens the port and forwards all data received to serial device.
4 Serial Port RS232 to Ethenret Converter St-TCP540I

httpsD Client

Modbus Serial to IP converters ST-TCP540I support serial data transmitted to designed server in httpsD way.
4 Serial Port RS232 to Ethenret Converter St-TCP540I

WebSocket

Support WebSocket Sever, Built Websocket link with devices by Websocket of webpage HTML5
Data transmission between built-in webpage and serial port in bi-directional Custom webpage and websocket are acceptable Achieves the functions of displaying data in real-time.

Modbus Serial to IP converters ST-TCP540I
Support Modbus gateway
4 Serial Port RS232 to Ethenret Converter St-TCP540I
Application

Unattended Weighing

Modbus serial to IP converters ST-TCP540I connect to the gateway and the control center remotely controls the switch ON/OFF via Ethernet. Meanwhile, ST-TCP540I also support unified use of unattended weighing equipment like license plate snapshot serial port camera, weighing instrument, LED promoting screen, card reader, vehicle induction loop, receipt printer and so on.
4 Serial Port RS232 to Ethenret Converter St-TCP540I4 Serial Port RS232 to Ethenret Converter St-TCP540I
 

4 Serial Port RS232 to Ethenret Converter St-TCP540I

You Might Also Like