Basic Info.

Model NO.

CM-02

Model NO.

CM-02

Product Desciption

Cutting Machine

This machine can make samples for Tensile, Rheometer and Mooney Viscometer. It is easy to operator and suitable for many kinds of knife.
 
Specification:
CM-02: Pneumatic type; Input air pressure ≥ 0.5Mpa
Cutting pressure:7KN force under the input pressure of 0.6Mpa
Cutting travel: 50mm
Size (W×L×H):340×220×500 (mm)
Operation:  Two hands control mode by two buttons.
Weight:25kg
 
Default configures:
Main part ---- 1 piece
Basis Nylon board   ---- 1 piece
(Note: knives are not included in the default configures, they can be chosen by the buyer)
 
 
Optional knives and manual:
knives can be fixed to the cutting machine or just put on the samples and can be moved.
1)Cutting with the fixed knives:
Fixed the knife to the cutting machine, put the Nylon board on the lower base of the cutting machine, put the sample on the Nylon board and adjust it to the centre of the knife.
Press the left button by left hand and then press the right button by right hand. Knife will be moved down and cut the sample. When finished cutting, loose the right hand, knife will be moved up to the initial place and then loose the left hand. The sample will be removed from the knife automatically.