Sunhans Full Set 5.8g Wireless Amplifier Network 2W 33dBm WiFi Repeater Signal Booster

China Sunhans Full Set 5.8g Wireless Amplifier Network 2W 33dBm WiFi Repeater Signal Booster, Find details about China Cell Booster Network Repeaters, Cellular Range Extender from Sunhans Full Set 5.8g Wireless Amplifier Network 2W 33dBm WiFi Repeater Signal Booster

Model NO.
SHRC58G2WP2
Item
2W 5.8GHz 35dBm WiFi Signal Booster
Sku
0305sh200783
Operating Range
5.0~5.875 GHz
Input Power
0~20 dBm
Transmit Gain
15-18dB
Output Power
2W (33dBm)
Supported Voltages
5V~16V/2A DC
Material
Cast Aluminum
Booster Size
7.3 X 3.8 X 1cm
Booster Weight
46g
Trademark
Sunhans
Transport Package
Carbon
Specification
15.2x10.2x1.4cm
Origin
China
Model NO.
SHRC58G2WP2
Item
2W 5.8GHz 35dBm WiFi Signal Booster
Sku
0305sh200783
Operating Range
5.0~5.875 GHz
Input Power
0~20 dBm
Transmit Gain
15-18dB
Output Power
2W (33dBm)
Supported Voltages
5V~16V/2A DC
Material
Cast Aluminum
Booster Size
7.3 X 3.8 X 1cm
Booster Weight
46g
Trademark
Sunhans
Transport Package
Carbon
Specification
15.2x10.2x1.4cm
Origin
China
Sunhans 5.8GHz Wireless Signal Booster 2W 33dBm WiFi Signal Repeater Amplifier Extender for Drones with 5.8GHz RX & TX Antenna
 

Product Description

Features:  
Excitingly small! Only 46g!
5-16V wide voltage range;
5.8GHz, Max. 2000mW output power;
Aluminum-alloy case by CNC, anti-interference;
Full kit, easy to install; light weight, small size, protable;
Designed for Drones, UAV, RC equipment....

 
Sunhans Full Set 5.8g Wireless Amplifier Network 2W 33dBm WiFi Repeater Signal Booster

 

Detailed Photos


Sunhans Full Set 5.8g Wireless Amplifier Network 2W 33dBm WiFi Repeater Signal Booster

Sunhans Full Set 5.8g Wireless Amplifier Network 2W 33dBm WiFi Repeater Signal Booster
Sunhans Full Set 5.8g Wireless Amplifier Network 2W 33dBm WiFi Repeater Signal Booster


Sunhans Full Set 5.8g Wireless Amplifier Network 2W 33dBm WiFi Repeater Signal Booster

Product Parameters

Cell phone Amplifier Description: 2000mW 5.8Ghz 33dBm WiFi Signal Booster
 

SKU0305SH200738
ModelSHRC58G2WP2
Operating Range5.0~5.875 GHz
Operating Mode
 
Bi-directional, half-duplex, time division duplex senses RF, 
carrier from transmitter and automatically switch receiving to transmitting mode

 
Input power0~20 dBm
Transmit gain15-18dB
Output Power2W (33dBm)
Receiver Gain≤ 12 dB
Noise Figure≤3.5 dB typical
Frequency Response±1dB over operating range
Connector typeSMA Receptacle 50ohm,To radio SMA female(hole inside),To antenna RP-SMA female(pin inside)
Power supply5V~16V/2A DC
Operating Temperature-20°C to + 70°C
Operating HumidityUp to 75% relative humidity
MaterialCast Aluminum
Booster Size7.3 x 3.8 x 1cm
Booster Weight46g

Package contents:

2 x SH- RC58G2W eSunRc WiFi booster
2 x RG141 SMA male to RP-SMA male
2 x RG178 IPEX to RP-SMA female
2 x DC 2.5" to 12V 5.5" adapter
2 x DC 2.5" to USB adapter
2 x DC 2.5" to JST adapter
2 x Mounting Velcro
2 x User manual
1 x 5.8GHz RX +TX antenna

Our Advantages

All specifications of PA can be customized based on customer requirement.
 

Sunhans Full Set 5.8g Wireless Amplifier Network 2W 33dBm WiFi Repeater Signal Booster
The 5.8GHz WLAN signal booster is designed for IEEE 802.11b/g/n Wireless LAN Applications.

The product is compatible with time division duplexing (TDD) method of WLAN and using rapid microwave detection technology to provide high linearity amplification.

The signal booster can work with most WLAN/Wi-Fi device and increase the WLAN signal strength, therefore a larger WLAN coverage and more stable transmission rate. 
  
SHRC58G2WP 5.8ghz 2w 33dBm is specially designed for  UAV, drones, compatible perfectly with DJI, Yuneec, 3DR, XIRO, Parrot, JTT and Blade, also auitable for active speaker, router and so on. 


Sunhans Full Set 5.8g Wireless Amplifier Network 2W 33dBm WiFi Repeater Signal Booster

Features:
1. Easy Installation
2. Plug and play, no software setup

3. 3.5dB ultra-low noise
4. Aluminum-alloy case by CNC, it can expand wifi signal range 10-20 times
5. Can enlarge WiFi signal coverage range, as long as the frequency of the product can be applied
6. Widely used in security, drones, urban hotspot coverage, railway hotspot coverage, etc.
Sunhans Full Set 5.8g Wireless Amplifier Network 2W 33dBm WiFi Repeater Signal Booster

1. What is the WiFi signal booster?
  The working mode of the WiFi signal booster needs to be connected to the signal source (customer device which cause wifi signal ) through one end of the cable, and the other end is connected to the antenna, and the WiFi signal range is expanded through the antenna.

2. About LED lights.
1). A flashing green light indicates that the wifi signal booster is powered on.
2).Normal operation is a red light flashing green, indicating that the signal booster receives the signal from the device and sends a wifi signal.


3. Can I install the Sunhans booster myself?
 Of course, our products are easy to install and plug and play, and the product package contains instructions for each product.
Sunhans Full Set 5.8g Wireless Amplifier Network 2W 33dBm WiFi Repeater Signal Booster

Company Profile

About us
Sunhans Full Set 5.8g Wireless Amplifier Network 2W 33dBm WiFi Repeater Signal Booster
Sunhans Full Set 5.8g Wireless Amplifier Network 2W 33dBm WiFi Repeater Signal Booster
Sunhans Full Set 5.8g Wireless Amplifier Network 2W 33dBm WiFi Repeater Signal Booster

After Sales Service

Our Service:                                                                                                                                                                                       

    ♦ Test process : every items will be testing before shipping, to make sure the quality.
    ♦ Short leading time: 1-2.5 working days for samples or small order, 10-15 working days for bulk order.
    ♦ One year warranty: for you without trouble of after-sales maintenance.
    ♦ Quality Guarantee: Return rate is only 0.001.
    ♦ Support small orders: help your business from small to big.
    ♦ OEM & ODM are welcome.