Flammability Testing Equipment Needle Flame Tester For Plastic IEC 60695

Usage:
Flammability Testing Equipment Needle Flame Tester For Plastic IEC 60695 in accordance with national standards
GB4706.1-1998 "Safety of household and similar electrical appliances: General requirements" "needle flame test methods" GB5169.5-1997 provisions For lighting, low-voltage electrical equipment, household appliances, electrical machines, motors, power tools, electronic equipment, electrical instruments, electrical connectors, accessories and other electrical and electronic equipment and parts, components research, production and quality control departments and insulating materials, plastic or other solid combustible materials industry and other small-flame ignition source simulation. 

Flammability Testing Equipment Needle Flame Tester For Plastic IEC 60695 is a predetermined size (Φ0.9mm) needle burner pass to a specific gas (butane) to 45 ° angle orientation Shi burning timed test, depending on whether the test ignition and combustion time and hold to assess the length of the internal combustion equipment due to fault conditions caused by the small flame of fire risk.

Model:

GD- 60695

Standard:

GB4706.1,GB5169.5-2008, IEC60695-2-2IEC60695-11-5

Comply with the relevant standards GB4706.1, GB5169.5-2008, IEC60695-2-2IEC60695-11-5 etc.

Technical Parameters:

1. Needle burner: stainless steel, the inner diameter of ¢ 0.5 ± 0.1mm, an outer diameter of not more than ¢ 0.9mm, length 35mm more needles, no air access;

2. The burner angle: vertical (when adjusting and measuring the flame height) or inclined 45 ° (the test);

3. Combustion gases: 95% butane gas or propane gas;

4. Ignited bedding layer: white pine plank (thickness 10mm), surface covering 12 ~ 30g / m2 standard tissue paper layer is applied at lower flame from 200mm ± 5mm;

5. Temperature range: 0--1000 ºC;

6. The flame temperature requirements: from 100 ± 2 ºC ~ 700 ºC ± 3 ºC, should be completed within 23.5 ± 1.0s;

7. The flame height: 12mm ± 1mm;

8. Shi burning time: 0s ~ 999.9s adjustable, generally set at the 30s;

9. Holding burning time: 0s ~ 999.9s, automatic recording, manual pause;

10. Test Space: ≥0.5m3, black background, (can be customized cubic 0.75 m3 or 1 m3 according to customer requirements);

11. Temperature sensor: K-type insulation-sheathed thermocouple (Φ0.5mm);

12. Test program automatic control, independent ventilation system;

13. Dimensions: L1120 * W520 * H1250mm, exhaust Φ100mm;

14. Test Power: 220V / AC, 50H.

Specification: