Products

GPS Antenna Module with Mediatek Mt3339 Chipset Nmea-0183 Ttl

China GPS Antenna Module with Mediatek Mt3339 Chipset Nmea-0183 Ttl, Find details about China GPS Antenna Module, GPS Module from GPS Antenna Module with Mediatek Mt3339 Chipset Nmea-0183 Ttl

Model NO.
DM1616
Chip Set
Mediatek Mt3339
Package
Plastic Tray , Paper Cartoon
Communication Type
Uart/Ttl
Trademark
DeliNComm
Transport Package
Plastic Tray, Paper Cartoon
Specification
Module Size: 16.1x16.1x6.65mm
Origin
China
Model NO.
DM1616
Chip Set
Mediatek Mt3339
Package
Plastic Tray , Paper Cartoon
Communication Type
Uart/Ttl
Trademark
DeliNComm
Transport Package
Plastic Tray, Paper Cartoon
Specification
Module Size: 16.1x16.1x6.65mm
Origin
China
  General Description

        The Delin DM1616 is a complete GPS engine module that features super sensitivity, ultra low power and small form factor. The GPS signal is applied to the antenna input of module, and a complete serial data message 
with position ,velocity and time information is presented at the serial interface with NMEA protocol or custom protocol.

        Its -165dBm tracking sensitivity extends positioning coverage into place like urban canyons and dense
foliage environment where the GPS was not possible before. The small form factor and low power consumption make the module easy to integrate into portable device like PNDs, mobile phones, cameras and vehicle navigation systems.

Applications
  1. LBS (Location Based Service)
  2. PND (Portable Navigation Device)
  3. Vehicle navigation system
  4. Mobile phone
Features
  1. Build on high performance, low-power MediaTek MT3339 chip set
  2. Ultra high Track sensitivity: -165dBm
  3. Extremely fast TTFF at low signal level
  4. Built in high gain LNA
  5. Low power consumption: Max 28mA@3.3V
  6. NMEA-0183 compliant protocol or custom protocol
  7. Operating voltage: 2.8V to 4.3V
  8. Operating temperature range:-40 to 85ºC
  9. Patch Antenna Size: 15x15x4mm
  10. Module Size: 16.1x16.1x6.65mm
  11. Communication type: UART/TTL
  12. RoHS compliant (Lead-free)
GPS Antenna Module with Mediatek Mt3339 Chipset Nmea-0183 Ttl
GPS Antenna Module with Mediatek Mt3339 Chipset Nmea-0183 Ttl

  1.2.Power Supply

        Regulated power for the DL-1616N-GCMF is required. The VCC Pin Need a stable DC voltage supply. Power supply ripple must be less than 30mV. The input voltage Vcc should be 2.8V~4.3V, Recommended power supply voltage is 3.3V . maximum current is 20mA. Suitable decoupling must be provided by external decoupling circuitry.

   1.3.UART Ports

        The module supports two full duplex serial channels UART. All serial connections are at 3V CMOS logic levels, if need different voltage levels, use appropriate level shifters. The baud rate of both serial ports are fully programmable, the data format is however fixed: X, N, 8, 1, i.e. X baud rate, no parity, eight data bits and one stop bit, no other data formats are supported, LSB is sent first. The modules default baud rate is set up 9600bps, however, the user can change the default baud rate to any value from 4800 bps to 115kbps. UART port can be used for firmware upgrade, NMEA output and PMTK proprietary commands input.
 
 2.Application
 
       The module is equipped with a 5-pin pad that connects to your application platform. The DL-1616N-GCMF module It consists of a MediaTek MT3339 single chip GNSS IC which includes the RF part and Baseband part, a patch antenna, a LNA, a SAW filter, a TCXO, a crystal oscillator.

2.1. Pin Assignment                                              
   
                                                                   GPS Antenna Module with Mediatek Mt3339 Chipset Nmea-0183 Ttl

                     
  

2.2.Mechanical Dimensions

      This chapter describes the mechanical dimensions of the DL-1616N-GCMF module. Size unit(mm)
 
   GPS Antenna Module with Mediatek Mt3339 Chipset Nmea-0183 Ttl

 
 


 

 

You Might Also Like