Products

Delincomm GPS Engine Module Super Sensitivity Module Mtk

China Delincomm GPS Engine Module Super Sensitivity Module Mtk, Find details about China GPS Module, Low Power GPS from Delincomm GPS Engine Module Super Sensitivity Module Mtk

Model NO.
DL-1108-M
Trademark
Delincomm
Origin
Shenzhen
Model NO.
DL-1108-M
Trademark
Delincomm
Origin
Shenzhen
Product Description

Delincomm GPS Engine Module Super Sensitivity Module Mtk
Delincomm GPS Engine Module Super Sensitivity Module Mtk
Delincomm GPS Engine Module Super Sensitivity Module Mtk
Delincomm GPS Engine Module Super Sensitivity Module Mtk

Delincomm GPS Engine Module Super Sensitivity Module Mtk

 Key Features
Parameter
Power Supply		Specification
Supply voltage: 2.8V~4.3V Typical: 3.3V
Power ConsumptionAcquisition: 45mA @VCC=VBAT=3.3V
Tracking: 40mA @VCC=VBAT=3.3V
Standby: 2.0mA @VCC=VBAT=3.3V
Backup: 20uA @VBAT=3.3V
Receiver TypeCode 66 search channels, 22 synchronous tracking channels
GPS&&QZSS L1 1575.42MHz C/A , GLONASS L1OF 1602MHz
SBAS: WAAS, EGNOS, MSAS, GAGAN
SensitivityTracking: -165dBm
Re-acquisition: -156dBm
Acquisition: -148dBm
TTFF (EASY enabled)Cold start(Autonomous): 35s typ @-130dBm
Cold start(Autonomous): 30s typ @-130dBm
Hot start (Autonomous): 1s typ @-130dBm
TTFF (EASY disabled)Cold start(Autonomous): 35s typ @-130dBm
Cold start(Autonomous): 30s typ @-130dBm
Hot start (Autonomous): 1s typ @-130dBm
Horizontal Position
Accuracy (Autonomous)		<2.5m CEP @-130 dBm
Max Update RateUp to 10Hz,1Hz by fault
Accuracy of 1PPS Signalnot enabled
Dynamic PerformanceMaximum altitude: 18,000m
Maximum velocity: 515m/s
Acceleration: 4G
UART PortUART Port: TXD and RXD
Supports baud rate from 4800bps to 115200bps, 9600bps by default
UART port is used for NMEA output, MTK proprietary
commands input and firmware upgrade
Temperature RangeNormal operation: -40°C ~ +85°C
Storage temperature: -45°C ~ +125°C
 Pin Assignment
 Delincomm GPS Engine Module Super Sensitivity Module Mtk

Pin Definition
 
Pin namePin No.I/O
 		Description
 		DC Characteristics
 		Comment
 
VCC1I
 		Main power supply
 		Vmax=4.3V 
Vmin=2.8V 
Vnom=3.3V
 		Supply current not less than 100mA.
 
VBAT9IBackup power supply
 		Vmax=4.3V
Vmin=1.5V 
Vnom=3.3V
 		Supply power for RTC
domain. 
The VBAT pin can
be directly supplied power by battery or connect it to VCC.
 
GND2.5.6.8
 		GGround Assure a good GND connection to all GND pins of the module,
 preferably with a large ground plane.

 
RXD3IReceive data
 		VILmin=-0.3V VILmax=0.8V VIHmin=2.0V VIHmax=3.6V
 		 
TXD4OTransmit data
 		VOLmin=-0.3V 
VOLmax=0.4V 
VOHmin=2.4V
 VOHmax=3.1V

 		 
RF_IN7I External active antenna RF input
 		   Characteristic impedance of 50Ω

 		 
RESET10ISystem reset
 		VILmin=-0.3V 
VILmax=0.8V 
VIHmin=2.0V 
VIHmax=3.6V
 		Low level active. If unused, keep this pin open or connect it to VCC.

 
Delincomm GPS Engine Module Super Sensitivity Module Mtk
 

You Might Also Like