Products

GPS&Beidou Module Gnss Smart Antenna Module GPS Module

China GPS&Beidou Module Gnss Smart Antenna Module GPS Module, Find details about China Gnss Module, GPS Module from GPS&Beidou Module Gnss Smart Antenna Module GPS Module

Model NO.
DM3030-B
Port Number
Multiplex Multi-Purpose Channel
Model
Integration Type
Carrier Frequency
Dual-Frequency
Trademark
DeliNComm
Transport Package
Tray/Box/Carton
Origin
China
HS Code
8517707090
Model NO.
DM3030-B
Port Number
Multiplex Multi-Purpose Channel
Model
Integration Type
Carrier Frequency
Dual-Frequency
Trademark
DeliNComm
Transport Package
Tray/Box/Carton
Origin
China
HS Code
8517707090
GPS&Beidou Module GNSS Smart Antenna Module GPS module
 
     The Delin Comm DM3030-B is a complete GPS&Beidou engine module that features super sensitivity, ultra low power and small form factor. The GPS&Beidou signal is applied to the antenna input of module, and a complete serial data message with position, velocity and time information is presented at the serial interface with NMEA protocol or custom protocol.
     Its -165dBm tracking sensitivity extends positioning coverage into place like urban canyons and dense foliage environment where the GPS&Beidou was not possible before. The small form factor and low power consumption make the module easy to integrate into portable device like PNDs, mobile phones, cameras and vehicle navigation systems.
Applications
  1. LBS (Location Based Service)
  2. PND (Portable Navigation Device)
  3. Vehicle navigation system
  4. Mobile phone
Features
  1. Build on high performance, low-power MediaTek AG3331 chip set
  2. Ultra high Track sensitivity: -165dBm
  3. Extremely fast TTFF at low signal level
  4. Built in high gain LNA
  5. Low power consumption: Max 45mA@3.3V
  6. NMEA-0183 compliant protocol or custom protocol
  7. Operating voltage: 3.0V to 5.0V
  8. Operating temperature range:-40to85ºC
  9. Patch Antenna Size: 25x25x4mm
  10. Module Size: 30x30x8.4mm
  11. Communication type: UART/TTL
  12. RoHS compliant (Lead-free)

Key features
 
ParameterSpecification
Power Supply
  • Supply voltage: 2.8V~4.3V Typical: 3.3V
Power Consumption
  • Acquisition: 45mA @VCC=VBAT=3.3V
  • Tracking: 40mA @VCC=VBAT=3.3V
  • Standby: 2.0mA @VCC=VBAT=3.3V
  • Backup: 20uA @VBAT=3.3V
Receiver Type
  • Code 66 search channels, 22 synchronous tracking channels
  • GPS&&QZSS L1 1575.42MHz C/A , Beidou B1 1561.098MHz
  • SBAS: WAAS, EGNOS, MSAS, GAGAN

Sensitivity
  • Tracking: -165dBm
  • Re-acquisition: -156dBm
  • Acquisition: -148dBm
TTFF (EASY enabled)
  • Cold start: 15s typ @-130dBm
  • Warm start: 5s typ @-130dBm
  • Hot start : 1s typ @-130dBm

TTFF (EASY disabled)
  • Cold start(Autonomous): 35s typ @-130dBm
  • Warm start (Autonomous): 30s typ @-130dBm
  • Hot start (Autonomous): 1s typ @-130dBm
Horizontal Position Accuracy (Autonomous)
  • <2.5m CEP @-130 dBm
Max Update Rate
  • Up to 10Hz,1Hz by fault
Accuracy of 1PPS Signal
  • not enabled
Acceleration Accuracy
  • Without aid: 0.1m/s²

Dynamic Performance
  • Maximum altitude: 18,000m
  • Maximum velocity: 515m/s
  • Acceleration: 4G


UART Port
  • UART Port: TXD and RXD
  • Supports baud rate from 4800bps to 115200bps, 9600bps by default
  • UART port is used for NMEA output, MTK proprietary commands input and firmware upgrade
Temperature Range
  • Normal operation: -40°C ~ +85°C
  • Storage temperature: -45°C ~ +125°C
Physical Characteristics
  • Size: 30±0.20 ×30±0.20 ×8.4±0.20mm
  • Weight: Approx. 12.6g

GPS&Beidou Module Gnss Smart Antenna Module GPS Module



GPS&Beidou Module Gnss Smart Antenna Module GPS Module

 

You Might Also Like