The belts with high grip/rough top top cover specially suited for inclined and declined conveyance, All of them is belts are impervious to impact,wear and abrasion resistant and known for its high tenacity and long life lasting. 

Belts with anti-static, flameretardant, low noise, high friction,high abrasion resistant applied to logistics and airport, check-in, merge and take away, curve belts, x-ray scanning, super market check-out counters, warehouses, mail sorting systems, bulk, packaging, electronic production and other automatic produciton lines etc.

Trapezoidal tracking guides of PVC, PU For good results, the grooves in the pulleys, rollers and slider beds must be larger than the tracking guide.

PVC and PU notched trapezoidal tracking guides.Uniform notches increase flexibility and reduces minimum pulley diameter by 10%

Main applications in belting:

• Paper and Cardboard Industry
• Wood Industry
• Inclined transportation
• Tobacco Industry
• Agriculture

Company Introduction

Before installation
Before installation it is recommended to clean the conveyor.
Replacing the old belts allow the maintenance of the other conveyor components.
- Clean the shafts and the belt supports.
- Check the position of drums and shafts. If it is necessary align them.
- Install tension devices to the minimum position.
- Check the drive drum cover or replace it.
Installation
Install the belt on the conveyor. Please note: on the belt should not be any folds and creases.
Tension
Tighten the belt so that there is no slippage of the drive drum with a full load and before work start.
Maintenance
Properly selected belts are stable and resistant to the transported products.
Belts do not have any extraneous odors, do not start staining the products and do not affect the quality of the products.
Belts are easy to clean with water and neutral washing detergents.
To prevent belt's slipping it is necessary to clean the conveyor regularly.
Belt's slipping leads to its irreparable damage.