PU Conveyor belts

Our comprehensive range of Polyurethane (PU) Belts are able to fulfil the application needs for light to heavy processing and conveying applications.

PU conveyor belts are made of polyester fabrics with a PU coating on the top and/or bottom side. A belt consists of one or more fabric plies to give certain features such as strength, stability and impact resistance.


The coatings Polyurethane which have influence on the suitability of the belt in a certain application.Polyurethane belts are mainly used in the Food Industry. Due to its structure, polyurethane belts do not give off damaging toxins or chemicals. Thermoplastic polyurethane coating material excels through its exceptional resistance to grease, oils and chemicals.


 

With our experienced and skilled personnel, UNI belting have the depth of technical knowledge required to solve even the most complex of your belting problems.

We produce a wide range of both thermoplastic and thermoset materials that meet even the most stringent industry standards, both for direct contact as well as for packed product conveying. For the food industry, we manufacture belts for use with high or low temperatures  with excellent resistance to oils and fats and superb release characteristics for multiple markets.

UNI Belting fabricates thermoplastic belting that can be provided with numerous accessories for better incline possibilities, spilling of product, belt tracking, etc.

The larger part of our cleats and guides are extruded materials of a superior blend of raw materials specifically formulated to match belt covers. Special care is taken for a constant and superior quality.

All cleats, both extruded and fabric-reinforced, are designed to carry weight and stay upright. With bigger loads, we envisage maximum flexibility with greater mechanical strength.






RECOMMENDATIONS FOR USING, INSTALLATION, STORAGE AND MAINTENANCE OF BELTS:
Storage
Recommendations:
- Belts are stored in their original packing until they are installed.
- Belts of large length or width are desirable to hang or place on a flat surface.
- Belts' protection from the low temperatures and the sunlight is necessary.
- If the storage conditions are very different from the working conditions, it is recommended to wait at least 12 hours under normal operating temperature before installation.
Before installation
Before installation it is recommended to clean the conveyor.
Replacing the old belts allow the maintenance of the other conveyor components.
- Clean the shafts and the belt supports.
- Check the position of drums and shafts. If it is necessary align them.
- Install tension devices to the minimum position.
- Check the drive drum cover or replace it.
Installation
Install the belt on the conveyor. Please note: on the belt should not be any folds and creases.
Tension
Tighten the belt so that there is no slippage of the drive drum with a full load and before work start.
Maintenance
Properly selected belts are stable and resistant to the transported products.
Belts do not have any extraneous odors, do not start staining the products and do not affect the quality of the products.
Belts are easy to clean with water and neutral washing detergents.
To prevent belt's slipping it is necessary to clean the conveyor regularly.
Belt's slipping leads to its irreparable damage.