Automatic Printed Box Folder Gluer
 

1. Specifications

1. Features Of The Machine
   1. Brief Introduction:

1. JHH-1050/1450 series Automatic Folder Gluer Machine is mainly used for the production of milk box, toy box, wine box and various kinds of printed box.
   1.  Key Points:

1. Long Folding Part which makes the folding of the carton better and help to eliminate the fishtail phenomena : For 1050 model the folding part is 2200mm long; and 3200mm long for 1450 model.
2. The driving adopts imported round type tooth belt with the feature of accuracy and low noise.
3. High speed - 200 meters per minute with stable and accurate folding.
   1. Features by Parts:

1. Feeding Unit:
2. Equipped with imported well known brand of under suction belts, automatic and continuously paper feeding, the interval can be adjusted by stepless speed regulator.
3. Independent feeding belt adjustment device, easy and convenient to adjust the position of the belts. .
4. Vibrating motor device together with vacuum sucking ensures accurate continuous feeding.
5. The front and sides guide plates can be adjusted up and down, reduce adjusting time.
6.  Side Lay

Equipped with self-correcting system,askew phenomenon adjusting with accurate feeding.

1. Crash Lock Bottom
2. The whole locker devices are equipped on fixed support, reduce machine adjusting and order changing time.
3. The locking speed is 60-400 pieces per minute, stable and reliable.
4. The up glue tank can be adjusted in up and down, left and right direction--accurate and independent, ensuring the glue quality.

Grinder at Lower Gluing mechanism is optional. Sander plasma and glue gun system can be mounted based on customer requirement. 

1. Gluing Part:
2. The standard width of down-glue tube part glue wheel is 8mm,Down-glue method Remarks;Glue wheel is 8MM,12MM,15MM,20MM which is optional to the client.
3. The standard width of up-glue wheel is 8MM(The optional with for up-glue wheel is 12mm).
4. Glue Tank can be adjusted left and right based on box type.
5. The glue volume can be adjusted with even glue supply. The high capacity,easy to maintain.
6. The tank uses fine copper-corrosion resistant and caters to a large variety of glue.
7. Folding section:
8. The folding section adopts lengthening design with wider imported folding belts which can ensure precise adjustment for the right and left folding belts and various angles of guide rollers featuring for in high stability and catering to the needs of different size and different material of cartons .
9. Both sides of this unit are equipped with imported well-known step-less speed regulator which can effectively regulate the differential speed of up and down belts and eliminate fish tail phenomena that happened during the folding of the cartons (boxes). The 90°folding device makes you no worry for the deviation of the belts when doing thick carton board.
10. Pre-pressing Section:
11. Pressure can be adjusted up and down easy and fast according to the thickness of the cartons which provide guarantee for the gluing quality.
12. The photoelectric counter is accurate and reliable. Man-machine interface touch screen can set order number or other parameters easy and convenient.
13. Conveying and Pressing Section:

1. There is a flapping device between the pre-pressing part and conveying and pressing part ( Option device for 1050 model and standard device for 1450 model). This device can do second correction to eliminate the fish tail phenomena.
2. A counter-kicker is equipped with this part to mark the number of the pile to facilitate the operator's pile number counting at the delivery part. The number to be kicked is set in the man-machine interface.  
3. The conveying and pressing belt adopts driving transmission and pneumatic pressing mode. The pressure can be adjusted according to the needs or thickness of the box through pressure regulator. There are sponge stripe on the upper conveying belt to make extra pressure to the gluing part to make the gluing  stronger.  

1. Electric Section:

Scientific and reasonable mechanical structure combined with reliable quality of imported electric automatic control give you a trouble-free operation.

1. Conveyor Section
   1. Flapping Device

Flapping device mainly applies to straight line box to do secondary fish tail correction as well as to some special-shaped box, ensuring folding precision.

1. Conveyer Section With Press Wheel

Conveyer section with press wheel mainly applies to crash hook bottom two folding box, it has the characteristics of good linkage between folding section and conveyer section with flexible adjustment features

1.  Main Configurations:

1. Electric Part: