Products

Microcomputer Controlled Automatic High Strength Bolt Tester Wdw -Z500W

China Microcomputer Controlled Automatic High Strength Bolt Tester Wdw-Z500W, Find details about China Bolt Tester, Torsion Testing Machine from Microcomputer Controlled Automatic High Strength Bolt Tester Wdw-Z500W

Model NO.
WDW-Z500W
Loading Method
Static Load
Display
Computer
Control
Computer Control
Weight
500-1000Kg
Power Source
AC380V
Oil Cylinder Position
None
Trademark
hiwoc
Transport Package
Plywood Case
Origin
China
Model NO.
WDW-Z500W
Loading Method
Static Load
Display
Computer
Control
Computer Control
Weight
500-1000Kg
Power Source
AC380V
Oil Cylinder Position
None
Trademark
hiwoc
Transport Package
Plywood Case
Origin
China

1. Introduction
WDW-Z500W detector is mainly used for the detection of high-strength bolt connection pair, and can test the axial force and torque (or torque coefficient) of the large-hexagonal high-strength bolt connection pair (m16-m30).The equipment is automatically loaded by cycloidal pinwheel reducer, linear guide rail, all Chinese operation interface, microcomputer control of high-strength bolts automatically tighten, relax, reset, the operation process intelligent tips, easy and fast operation.When the axial force after reaching the standard setting, the detector will automatically record test data, through the computer automatically calculates the average axial force and average torque, sample average torque coefficient, standard deviation and coefficient of variation, and it can display the curve of coefficient of output torque, axial force, torque curve, etc., at the same time with parameter setting, calibration, the calibration data report printing and query function.
2. Structural features:
  1. The height of the main machine adopts the horizontal structure of man-machine design principle, the test process is safe and easy to operate.
  2. The bolt-torsion-pull installation test module is installed on the linear guide rail, and the specimen is easy to install and adjust.
  3. Foolproof software design, the test process is completed with one key.
  4. The input end is uniformly loaded by a reducer, which greatly improves the consistency, repeatability and authenticity of the experimental results.
  5. The lower end of the machine body is equipped with a toolbox, which makes it more convenient for test operators to work.     
Software      

Microcomputer Controlled Automatic High Strength Bolt Tester Wdw-Z500W


Power system



 Servo motor                             Servo driver
Parts:
Microcomputer Controlled Automatic High Strength Bolt Tester Wdw-Z500W

Anti-rotating fixture                  Bolt fixture               Bolt head fixture plate
Microcomputer Controlled Automatic High Strength Bolt Tester Wdw-Z500W

          
Torque sensor                            The sleeve
  1. Main technical parameters
Axial force detection range20-500kN
Torque detection range20-2000Nm
Bolt specificationM16~M30
The length of the bolt60~280mm
Repeatability error0.5%
Resolution0.25%
The control modePC
Display modeLCD
The data processingSoftware measurement and control system
 
  1. Main configuration list
AssemblyNumberManufacturer
Test host and controller1Independent production
PC1Lenovo
Reducer1Zhongju.China
Servo motor and driver1Zongwei.China
Axial force transducer 500kN1Zhenhai.China
Torque sensor 2000 N.m1
Bolt clamping device1
 		Independent production
Bolt baffle 16,20,22,24,27,30
Bolt inner baffle 16,20,22,24,27,30
Anti-rotating fixture 16,20,22,24,27,30
The file data
Software
The sleeve 27,34,36,41,46,50  
Linear guide1Taiwan.China

Microcomputer Controlled Automatic High Strength Bolt Tester Wdw-Z500W
Microcomputer Controlled Automatic High Strength Bolt Tester Wdw-Z500W
Microcomputer Controlled Automatic High Strength Bolt Tester Wdw-Z500W
Microcomputer Controlled Automatic High Strength Bolt Tester Wdw-Z500W
Microcomputer Controlled Automatic High Strength Bolt Tester Wdw-Z500W
 

You Might Also Like