Products

Water Quality Turbidity Sensor Water Quality Transmitter

China Water Quality Turbidity Sensor Water Quality Transmitter, Find details about China Water Quality Sensor, Water Quality Transmitter from Water Quality Turbidity Sensor Water Quality Transmitter

Model NO.
RK-3001-ZD
Trademark
Rainbow
Transport Package
Standard
Origin
China
Model NO.
RK-3001-ZD
Trademark
Rainbow
Transport Package
Standard
Origin
China
Water quality turbidity sensor
RK-3001-ZD
Water Quality Turbidity Sensor Water Quality Transmitter
Water Quality Turbidity Sensor Water Quality Transmitter
Water Quality Turbidity Sensor Water Quality Transmitter


Product Introduction

1.Product overview

The water turbidity sensor is a continuous monitoring instrument probe that is widely used in thermal power, chemical fertilizers, metallurgy, environmental protection, pharmaceuticals, biochemistry, food and tap water solutions for continuous monitoring of turbidity and temperature.
This product adopts the laser scattering method, the sensor product has a long life, no maintenance, and excellent performance. The continuous monitoring data is connected to the recorder through the transmission output to achieve remote monitoring and recording.It can also be connected to the RS485 interface through the MODBUS-RTU protocol, which can be easily connected to the computer for monitoring and recording.
This product is equipped with a waterproof housing to convert the signal of the aqueous solution into a standard 485 signal after digital setting and analysis.The product does not need to be calibrated at one time, and it can be used by hand.


2.Features

This product probe uses the principle of laser scattering to measure the turbidity of water quality. The laser scattering method is relatively active in recent years and can overcome the shortcomings of traditional classical measurement methods that cannot be continuously measured online.The laser scattering method is stable in measurement, free from magnetic interference, does not consume probes, has high sensitivity, low detection limit, and long life. It has been widely used in sustainable online monitoring and other advantages.


3.Main parameters
parameter nameParameter content
Power supply9-24V DC
Power consumption≤0.15W(12V DC,25ºC)
measurement accuracy±3.0%
Measuring range0-1000NTU (default)  0-100NTU,0-4000NTU
Resolution0.1NTU,0.1ºC
output signalRS485/4-20mA/0-10V
Operating temperature0-50ºC
Response time≤1s
Working pressure range0-0.6Mpa(Water depth of 60 meters)
Repeatability±2%,±3ºC
Probe sizeφ32×145(mm)
Probe cable length5 meters(default)


4.System framework diagram

This sensor can be connected and used alone. First, use a 12V DC power supply. The device can be directly connected to a PLC with a 485 interface, and it can be connected to a single-chip microcomputer through a 485 interface chip.The single-chip microcomputer and PLC can be programmed through the modbus protocol specified later to cooperate with the sensor.At the same time, use USB to 485 to connect to the computer, and use the sensor configuration tool provided by our company for configuration and testing.
Water Quality Turbidity Sensor Water Quality Transmitter
This product can also be used by combining multiple sensors on a single 485 bus. Please follow the "485 bus field wiring rules" (see appendix) when performing 485 bus combination.In theory, one bus can connect more than 16 485 sensors. If you need to connect more 485 sensors, you can use 485 repeaters to expand more 485 devices,The other end is connected to a PLC with a 485 interface, connected to a single-chip microcomputer through a 485 interface chip, or connected to a computer using USB to 485, and configured and tested using the sensor configuration tool provided by our company.
Water Quality Turbidity Sensor Water Quality TransmitterWater Quality Turbidity Sensor Water Quality Transmitter
 

You Might Also Like