TK228 is the integration of GPS tracker + RFID car alarm + remote/Bluetooth diagnostics.

 

wireless immobilizer.

The device will read vehicle's ECU's data (speed, rpm, odometer, speed, driver behavior data...etc) via CAN-BUS and send out by GPRS network

remotely or by blue-tooth connection on spot.

It adapts 2.4Ghz RFID technology, which can make it work as a simple keyless alarm system with easy installation. In arm status, the following

operations will trigger alarm: engine on, vibration, cut-off power & take-out of the device. The system will send out alarm message with location by SMS/GPRS to your mobile phone or tracking center immediately.
 

Features & Functions: 

1. Plug-and-play design with OBD-II connector, compatible with all the vehicles with OBD-II connector, supports most of vehicles with the CAN-BUS
2. It is the integration of GPS tracker + RFID car alarm + Bluetooth diagnostics + wireless immobilizer 
3. Arm/disarm by SMS/phone call, or by 2.4G RFID tag automatically 
4. Check the real physical address (such as city name, street name.) directly 
5. Track by SMS/website to get the latitude, longitude, speed, direction & odometer

6. Movement alarm, Over-speed alarm, Geo-fence alarm 
7. Engine on alarm, Power failure alarm, Vibration alarm 
8. Anti-tamper alarm. Once the device is disconnected, it will trigger the alarm 
9. Built-in shock sensor for power saving & triggering vibration alarm 
10. Monitor the voice 
11. 2.4G long-distance contactless RFID tag for driver ID identification 
12. Keyless RFID car alarm function, arm/disarm automatically 
13. Accurate odometer & speed reading directly via CAN-BUS 
14. Data logger 8Mb for offline GPS waypoint 
15. Wireless immobilizer to stop the car in safe mode 
16. High reliable anti-tamper design. If the unit is unplugging illegally, it will lock the engine automatically.
17. Built-in rechargeable backup battery when the car battery is cut off or damaged, the built-in backup battery can work for emergency check, and the system will send out power failure alert immediately.
18. Two kinds of location information: GPS coordinates & GSM base station code.

19. Remote diagnostics function. Transmission of the CAN data via blue-tooth or GPRS network: 
(1) Vehicle's real-time data: battery's voltage, RPM, speed, TAP throttle opening, engine load, coolant temperature, fuel consumption, odometer, error code & times, acceleration times & deceleration times 

(2) Driver behavior data: ignition time, total driving time, total idling time, average engine hot-start time, average speed, history high speed, history RPM, total acceleration times & total deceleration times. 
20. Read the vehicle's error code & clear the error code via GPRS or Bluetooth