Introduction Nano Microporous Insulation Bare Board is based on the principle of microporous ,made by various materials through special processing.Its thermal conductivity rate is lower than the stillness air ,and almost ceramic fiber insulation materials'1/4 to 1/10,which is the most lowest conductivity rate among the other solid materials .Also have addressed worldwide insulation problems ,it is a unique and the best choice in some high temperature equipment that strictly need space and weight and have already motivated the innovation of other relevant insulation equipment design .Characteristics a. Low thermal conductivity and heat loss b. .Low thermal storage,good thermal stability c.High safety of environment protection d.Easy to cut and process e.Long working time Typical Applications
a.Steel(Tundish, ladle, torpedo ladle ) b.Petrochemical (cracking furnace ,hydrogen furnace,conversion furnace ,heating furnace )
c.Glass(float pool kiln,toughened furnace,hot bending furnace)
d.Heat-treatment furnace
e.Pipe insulation
f.Ceramics
g.Electrics
h.Household electrical appliances
i.Aerospace
j.Ocean shipping
k.Mine-used lifesaving cabin
Physical&Chemical technical data | Type | 1000ºC Microporous insulation board |
| Density (kg/m3) | 300-350 |
| Rupture strength(MPA) | 0.7 |
| Permanent linear shrinkage%(800ºC×6H) | <2.5% |
| Thermal conductivity rate (W/m.K) | 0.025(at 200 ºC) |
| 0.028(at 400 ºC) |
| 0.032(at 600 ºC) |
| 0.037(at 800 ºC) |
1000(900)×600(500)×5-20mm
Special size can be produced according to customer's requests .