We are professional 17-4pH(UNS S17400,1.4542,x5crnicunb16-4)Forged/Forging Rolled Steel Rings(AISI 630,17-4 pH,17/4 Ph,SUS 630,Z6CNU17-04,X5CrNiCuNb16.4) factory from china

We could produce 17-4Ph, UNS S17400, 1.4542 forged/forging rings with diameters ranging from 100MM to 6000MM and with weights from 10KGS to 15000KGS
We have 1 tons, 3 tons, 6 tons, 9 tons forging hammer and 4500 tons hydraulic press, and 3 metres and 6 metre seamless rolled rings machine
Our 17-4Ph, UNS S17400, 1.4542 forged/forging rings could be 100% Ultrasonic Inspection as per the forging parts UT Test standard of ASTM A 388 or EN10228.
We could supply 17-4Ph, UNS S17400, 1.4542 forging steel material certificate as per the standard of EN10204-3.1 or EN10204-3.2 of third party
Our 17-4Ph, UNS S17400, 1.4542 forged/forging rings are widely used in chemical pump, centrifugal pumps, ball valves, check valves, heat exchangers and pressure vessels. Stripper columns, separators, splitter, columns, hydro treaters, hydro crackers, desalters. In Cement industry and sugar industry, shipping building and Aviation, drilling stations, pipelines and refineries, in power generation and power plants. In oil & gas industry. Concrete mills and mixers, processing units, mechanical equipment, crystalizer equipment and so on
Any inquiry of 17-4Ph, UNS S17400, 1.4542 forged/forging rings, please feel free to contact us. We are glad to quote the best price for every clients

17-4PH
 
SUS630/X5CrNiCuNb16-40Cr17Ni4Cu4Nb /05Cr17Ni4Cu4Nb
17-4 Stainless Steel SHEET / PLATE
ROUND BAR 17-4 CENTERLESS GROUND
ROUND BAR 17-4 ROUGH TURNED
17-4 Precipitation Hardening also known as Type 630 is a chromium-copper precipitation hardening stainless steel used for applications requiring high strength and a moderate level of corrosion resistance. High strength is maintained to approximately 600 degrees Fahrenheit (316 degrees Celsius).
General Properties
Alloy 17-4 PH is a precipitation hardening martensitic stainless steel with Cu and Nb/Cb additions. The grade combines high strength, hardness (up to 572°F / 300°C), and corrosion resistance.
Mechanical properties can be optimized with heat treatment. Very high yield strength up to 1100-1300 MPa (160-190 ksi) can be achieved.
The grade should not be used at temperatures above 572°F (300°C) or at very low temperatures. It has adequate resistance to atmospheric corrosion or in diluted acids or salts where its corrosion resistance is equivalent to Alloy 304 or 430.
Applications
Offshore (foils, helicopter deck platforms, etc.)
Food industry
Pulp and paper industry
Aerospace (turbine blades, etc.)
Mechanical components
Nuclear waste casks